Which nVidia GPUs are you using?

johnd126

n3wb
Oct 25, 2023
3
2
Home
I'm moving my Blue Iris installation to a computer where I can actually install a video card and I'd like to get one that will work with the Codeproject AI. I don't have a ton of cash for this so I'm looking for the most inexpensive option that will run a useful version of CUDA. There is a refurbished Quadro K4000 available on Amazon for approx $100CAD, which is pretty much my price range. From what I can find it will only support CUDA 9.1. Is this good enough?

Which cards are everyone else using?
 
  • Like
Reactions: OSU_BuckeyesFan
So, I'll answer my own question: the Quadro K4000 will NOT work with Codeproject AI because it only supports compute level 3.0 and TyTorch (included with the AI package) requires compute level 3.7 or newer. Sending that card back and have another inexpensive card on the way.
 
  • Like
Reactions: Flintstone61
I must be in the way way back machine....running a nvidia gtx 1060 6GB card. seems to handle basic codeproject duties. I was running it on 7 cams. then i moved to internal IVS on 4 cams. now only 3 cams without AI running codeproject.
 
  • Like
Reactions: Gimmons
I have a gtx1080ti, which I don’t use for BI, but even though it’s about 13 years old, it’s a beast. You have to get pretty fancy card$ to out perform it. Overkill, unless you run lots of AI cameras, but if you do, it could probably handle the load despite its age.
 
NVIDIA Tesla P4 here, love it!
 
I have a gtx1080ti, which I don’t use for BI, but even though it’s about 13 years old, it’s a beast

1080 came out in 2017, so just 7 years old
 
  • Like
Reactions: Flintstone61
Launch dates 2nd column, ( if Wikipedia is accurate)
1734927909585.png
 
The challenge is to find an inexpensive, low profile and low power (70 watts or less) Nvidia card. Most of the reliable sellers are out of stock right now, at least for the GTX 3050 cards.
Amazon has low profile RTX 3050s



 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
I'm using a RTX3050 w/ CUDA 11.8.89. Been running this setup for about a year w/ 9 cameras on CPAI. No issues. I have been wondering if I could move up to CUDA 12, anyone running that on a RTX3050?

Michael
 
  • Like
Reactions: Flintstone61
Thanks for all your suggestions. Most of them were out out of my (admittedly too low) price range. I got a Quadro M2000 (with compute level 5.2) and I think it's working. I'm not seeing the CPU blip when it's doing object detection. But, it does seem to be missing some detections and there have been a few crashes. I hope to do more troubleshooting after the holidays.