New profile posts

Hello!
I’ve had an RCA HSDB2 doorbell for 3 years without issues BUT this spring, we lost wifi for 2 days. When it came back online, I noticed no notifications after 10am each day. It records any movement/motion at all times but doesn’t list it as an “event” in the video screen after 10am. I’ve tried the reset it along with disconnecting for about 10 mins but nothing seems to help. Can anyone help?

I have a old IPCC 9610 which is now frozen. I would like to purchase a higher rec camera which one is the best value

I am SMM & SEO Services Provider, Search Engine Optimization Expert. i have all the knowledge about online work you can also hire me,
Please visit our site

Hey Andy, I purchased 3 SD4A425DB-HNY PTZ cameras from you last month. one of them appears to have a defective iris. I cannot go above 24 on one of the cameras, which is causing an image that is too dark at night. The other 2 cameras adjust from 0 to 100 just fine. I would like to exchange this camera for another one. My order number is EM20231263. Let me know how we should proceed.

Не оплакивай смертный, вчерашних потерь, день сегодняшний, завтрашней меркой не мерь, ни было ни грядущей минуте не верь, верь минуте текущей.

hello everyone, I'm new on here and have been playing around with ip cameras and blue iris software. that said i have been able to do most of the research already and had hit dead ends everywhere.
I recently purchased 4 "WiFi Smart Camera" i discovered that they are Shenzhen icomm with ANYKA processor. i need to flash the firmware and gain access to the ONVIF and RTSP ports, however i can not access the camera webpage to change any of the settings. the camera makes you use the Yi IoT app to setup the device via a cloud system. im trying to disable the cloud and put the camera on blue iris via RTSP

here is the log file from the camera i disassembled to find the chipset info.


[2023/11/19 12:56:18][cloud_demo.c: sync_time(): 2242] yi_sync_time ok!
get net info:ip: 192.168.1.xxx, mask: 255.255.255.0, route: 192.168.1.1, dns1: 192.168.1.1, dns2: 8.8.8.8
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1476 errors:0 dropped:0 overruns:0 frame:0
TX packets:1476 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:85689 (83.6 KiB) TX bytes:85689 (83.6 KiB)

wlan0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX
inet addr:192.168.1.xxx Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:33 errors:0 dropped:2 overruns:0 frame:0
TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6274 (6.1 KiB) TX bytes:2811 (2.7 KiB)

wlan0 IEEE 802.11abgn ESSID:[Not For Your Eyes]
Mode:Managed Frequency:5.785 GHz Access Point: XX:XX:XX:XX:XX:XX
Bit Rate=30 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thrff Fragment thrff
Encryption keyff
Power Managementff
Link Quality=70/70 Signal level=-27 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:3 Missed beacon:0


[global]
user = admin
secret = admin
dev_name = 小K互联网摄像机
soft_version = 2000
uid_name = danale.conf

[ethernet]
dhcp = 1
ipaddr = 192.168.1.xxx
netmask = 255.255.255.0
gateway = 192.168.1.1
firstdns = 8.8.8.8
backdns = 108.108.108.108

[wireless]
ssid = [Not For Your Eyes]
mode = Infra
security = 3
password = [Not For Your Eyes]
running = softap

[softap]
s_ssid =
s_password =

osd_name = AKWIPC0000000010

Hik Connect with default server is slow. Hi everyone, I recently purchased hikvison accusense NVR with 8 channnels. I have four IP cameras of different Chinese vendors. When I use hik connect, it takes more than 10 seconds to load the video. I am in "fluent" mode in the app. I believe the issue is because the server is loaded. I want to setup my own server in a computer I have at home. I am trying to use ivms 4200 lite but the "activate" button is greyed. Is that possible with lite? Any idea if I can set it up? I could use either Windows or Linux. Any guides out there?
Thanks,
Eli

Hey Andy is there a new refurbished list? And is there a prime day list? Thanks

Do you have updated instructions/documentation for this new feature: "
ePTZ now can select and playback on NVR now.
" AND "
Illuminator Plan Configuration
" AND "
AcuPick Algorithm Version Display
"??? Also, after firmware cam upgrade I am not seeing an option for ABR?

Thanks!

Hi Andy,i need to change some old broken camera with new one.

do you ship to Europe from EmpireTech | Security Protection | Security Cameras & NVRs ?

Thank you so much.

hi, I need latest DAHUA http api doc. can u email to me?

Hi Mate,
Could you give me the firmware for DH-SD49425XB-HNR camera so i could use auto track.
Best regards,
thank you

Is the
"Outdoor 4MP Starlight 25X Optical Zoom IR PTZ Smart AI IP Camera PTZ494M-25X"
compatible with the Lorex N862 recorder?

Do you have the installation file to install QTView on a windows PC?

I postmortempriester,
I saw you find the good wire to connect UART to W6.
In what order is the connection when looking from the edge. TX / RX / VCC / GND
I've try all possibility, and none works.

did you find a solution to this problem?
YouTube Streaming problems

Andy...new here. I have a current residential camera system with 5 of these cameras - IP-5IRD4S34/28 and running the SuperLive Plus app on a local DVR. The cameras look great during the day, however at night they're pretty terrible. If we had an event, there would be no way I could recognize a license plate or even facial recognition with them. And the SuperLive app is even worse. When I turn on notifications, I get a dozen every minute from the wind blowing a tree slightly or a bug flying by. It's so bad I just turn them off and have resorted to using Wyze cameras to trigger actual alerts and if I need more detail I get into the SuperLive system. My questions for you:

1. Recommendations on upgraded cameras I can install with the existing DVR?
2. For the BlueIris app, can you adjust the motion sensitivity or select zones to trigger an alert to avoid all the unwanted alerts?

Thanks

New System Set Up
Newbie here. I have set up a few webcams at our local small airport so I have some (very little) experience. We are building a new terminal building at the airport and the manager asked me to set up a new security camera system with 7 – 8 cameras. Looking at Amcrest, Lorex, or Dahua system with a DVR/NVR. POE and Open Source are required and I will use Blue Iris.

One question I can’t find an answer to is do I need a DVR/NVR or can I just dedicate a computer as a server?

I would appreciate any comments and or gottcha’s in setting up a system like this.

Thank in advance to any and all who respond.

Ron