beretverde
n3wb
- Joined
- Apr 12, 2016
- Messages
- 13
- Reaction score
- 0
My Imporx Mini PTZ Bullet Camera arrived this past week and Im running into the following issues.
![IMG_20160503_182340.jpg](/data/attachments/8/8665-76e8b3e278e7ddd8ce59837345feb867.jpg)
When I plug it into the hikvision NVR it appears to turn on, when its dark the 2 ir lights can be seen. It also goes through a full pan tilt initial calibration before centering itself.
![2016-05-03.jpg](/data/attachments/8/8666-ab6233aadbee18d1f4f215c4a7077706.jpg)
I followed the instructions on the included CD, setting up internet explorer with activex and then attempting to hit the default IP via the browser. When I do this i get the following.
![Capture.PNG](/data/attachments/8/8667-69735f060be10b6413915087bdff7040.jpg)
In the sadp program that was included with the camera it only shows the hikvision NVR.
![sadp.PNG](/data/attachments/8/8668-b3ca12b773c63a13ca3fb6d634e95d5a.jpg)
This is what my nvr configuration looks like.
![IMG_20160503_183935.jpg](/data/attachments/8/8664-a0a9d0cd82c887f9018c061f99716b97.jpg)
I know I need to access the camera via its default Ip in order to change the settings for the NVR to see it. Any guidance on how to do this? Thank you.
![IMG_20160503_182340.jpg](/data/attachments/8/8665-76e8b3e278e7ddd8ce59837345feb867.jpg)
When I plug it into the hikvision NVR it appears to turn on, when its dark the 2 ir lights can be seen. It also goes through a full pan tilt initial calibration before centering itself.
![2016-05-03.jpg](/data/attachments/8/8666-ab6233aadbee18d1f4f215c4a7077706.jpg)
I followed the instructions on the included CD, setting up internet explorer with activex and then attempting to hit the default IP via the browser. When I do this i get the following.
![Capture.PNG](/data/attachments/8/8667-69735f060be10b6413915087bdff7040.jpg)
In the sadp program that was included with the camera it only shows the hikvision NVR.
![sadp.PNG](/data/attachments/8/8668-b3ca12b773c63a13ca3fb6d634e95d5a.jpg)
This is what my nvr configuration looks like.
![IMG_20160503_183935.jpg](/data/attachments/8/8664-a0a9d0cd82c887f9018c061f99716b97.jpg)
I know I need to access the camera via its default Ip in order to change the settings for the NVR to see it. Any guidance on how to do this? Thank you.