Raptor 2xxx 5.2.3

C

CBX

Getting the hang of it
May 28, 2014
104
55
Salut friends.

Raptor 2xxx 5.2.3 on our favourite Hikvision FTP site.

ftp://ftp.hikvisionusa.com/Hikvisio...2&25x2_WiFi_Camera_Firmware_v5.2.3_141024.zip

Labelled for Wifi only it works fine on my 2032 and 2732 OK.

Obvious changes are:

- prompted to change default password at login
- Moved some functions to "Smart Event" menu
- No extra languages

There's probably others and I would invite anyone to post them if discovered.

Seems minor update, but of course no change log (except the file that is contained in the .zip file which refers to 5.2.0 anyway) so who knows.

For people who have used my region change solution I can verify all tested OK on my cameras for 5.2.3. Any issues of course let me know.
 
  • Like
Reactions: msantic
CBX said:
Salut friends.

Raptor 2xxx 5.2.3 on our favourite Hikvision FTP site.

ftp://ftp.hikvisionusa.com/Hikvisio...2&25x2_WiFi_Camera_Firmware_v5.2.3_141024.zip

Labelled for Wifi only it works fine on my 2032 and 2732 OK.

Obvious changes are:

- prompted to change default password at login
- Moved some functions to "Smart Event" menu
- No extra languages

There's probably others and I would invite anyone to post them if discovered.

Seems minor update, but of course no change log (except the file that is contained in the .zip file which refers to 5.2.0 anyway) so who knows.

For people who have used my region change solution I can verify all tested OK on my cameras for 5.2.3. Any issues of course let me know.
Click to expand...

what is hikvision Ftp password and username?
 
Hi everyone!

I view that there is a new firmware 5.2.3 for the series DS-2CD2xx2, I have the series 2332-I and the 2232-I5, tomorrow I will proceed to update the camera and I tell you if I have some bugs after update.

At the moment I have the 5.2.0 firmware version.
Thanks
 
Hi everyone!
The fw 5.2.3 is compatible for the model 2CD2332? I proceeded with the update from the 5.2.0 to 5.2.3 but now the camera doesn't boot :( Always restarts! Anyone have any ideas?

Sorry for my bad english!
 
Yes, I try update some version of the firmware, the process finish successful but the camera already restart randomly!

You have a pm!
 
Succesful and already restart???
Make screeanshots of you recovery process!
 
This is the screen of the log when I try to update the fw
attachment.php
 

Attachments

  • Immagine.jpg
    Immagine.jpg
    283.7 KB · Views: 157
I try this process many many times but the result is always the same, camera reset randomly with the IR powered on and off
 
I updated to 5.2.3 without any problem on the wifi cam. but all in Chinese, then I went back to 5.2.0
 
You must log in or register to reply here.
Top Bottom