I have tested all my cameras via a poe cable and activated them via the sadp tool when the nvr had not been connected. When doing this I changed the ip addresses in sadp to that of my local network. e.g. 192.168.0.11 , 192.168.0.11 etc. Cameras are fine when looking through their individual web address as well as ivms software etc.
So I have hooked up the ds-7608 nvr and plugged the cameras into the nvr. When looking at the camera management screen from the nvr gui, the ip address for the cameras have now changed to 192.168.254.2 192.168.254.3 etc There is no video playback of the cameras via the nvr.
So do I need to now go back via sadp and change the camera ip address to match those from the nvr as the nvr has created its own 'new' network?
Thanks
So I have hooked up the ds-7608 nvr and plugged the cameras into the nvr. When looking at the camera management screen from the nvr gui, the ip address for the cameras have now changed to 192.168.254.2 192.168.254.3 etc There is no video playback of the cameras via the nvr.
So do I need to now go back via sadp and change the camera ip address to match those from the nvr as the nvr has created its own 'new' network?
Thanks