Hello everyone,
I'm pretty new to HikVision/IPC stuff, I've been playing around with my equipment (see below) for a couple of weeks now and overall everything is working smoothly.
Here is my current equipment:
- DS-KH8350-WTE1/EU (Indoor Station)
- DS-KD8003-IME1 (Door Station)
- DS-7604NI-K1/4P (NVR)
- DS-2CD2347G1-LU (ColorVu cam)
- 2x DS-2CD2045FWD-I (DarkFighter cam)
I have access to liveview from everywhere (iVMS, browser, Hik-Connect), the NVR is recording everything as requested and the records are easily accessible.
Indoor station and door station are on a standard PoE switch (192.168.1.x network).
NVR is on the same network (192.168.1.x).
Cameras are behind the NVR (192.168.254.x) and accessible with the Virtual Host option of the NVR.
The problem I'm facing now is that I would like to add the cameras (the ones in the 192.168.254.x network) into my indoor station.
The indoor station as of now is displaying the door station and any 192.168.1.x cam I could add without difficulty.
But I can't get it to display the cams behing the NVR. I tried following this document but I'm stuck at step 4 (page 4) since the dropdown menu in my iVMS only propose the 'Camera' option and no 'NVR' or 'Doorphone' options.
Is it a limitation of iVMS (using the lastest 3.2.0.10 version) or the indoor station or I am doing something wrong?
If I try to add my NVR as camera (well I've got no other choice) with 192.168.1.x IP + 554 port + a canal number used by a camera, only message I have on the indoor station is a "resolution not supported" error message. With any other setting (meddling with IP, port, etc..), I just have a "connection impossible" message.
Does anyone has a clue on this matter?
Thx.
I'm pretty new to HikVision/IPC stuff, I've been playing around with my equipment (see below) for a couple of weeks now and overall everything is working smoothly.
Here is my current equipment:
- DS-KH8350-WTE1/EU (Indoor Station)
- DS-KD8003-IME1 (Door Station)
- DS-7604NI-K1/4P (NVR)
- DS-2CD2347G1-LU (ColorVu cam)
- 2x DS-2CD2045FWD-I (DarkFighter cam)
I have access to liveview from everywhere (iVMS, browser, Hik-Connect), the NVR is recording everything as requested and the records are easily accessible.
Indoor station and door station are on a standard PoE switch (192.168.1.x network).
NVR is on the same network (192.168.1.x).
Cameras are behind the NVR (192.168.254.x) and accessible with the Virtual Host option of the NVR.
The problem I'm facing now is that I would like to add the cameras (the ones in the 192.168.254.x network) into my indoor station.
The indoor station as of now is displaying the door station and any 192.168.1.x cam I could add without difficulty.
But I can't get it to display the cams behing the NVR. I tried following this document but I'm stuck at step 4 (page 4) since the dropdown menu in my iVMS only propose the 'Camera' option and no 'NVR' or 'Doorphone' options.
Is it a limitation of iVMS (using the lastest 3.2.0.10 version) or the indoor station or I am doing something wrong?
If I try to add my NVR as camera (well I've got no other choice) with 192.168.1.x IP + 554 port + a canal number used by a camera, only message I have on the indoor station is a "resolution not supported" error message. With any other setting (meddling with IP, port, etc..), I just have a "connection impossible" message.
Does anyone has a clue on this matter?
Thx.
Last edited: