Althought it warm to touch after setting a while, so power is getting to it.
My new to me, never used Netgear JGS524PE is up and running now, I got to power up my Amcrest PoE cams using 4 different cables that I had using three cat 5e and one cat5. And all worked on that cam.
None worked with the new cam and in the cable tester on the switch shows a open cable.
I don't have BI up yet with new settings. I had to change from DHCP to static, so I was scratching my head on all that.
I did cover the light sensor and I heard no clicking noise.
192.168.1.108 comes up nothing in MS Edge.
AND I am not that experinced in all this networking stuff.
Any ideas?
Thanks
My new to me, never used Netgear JGS524PE is up and running now, I got to power up my Amcrest PoE cams using 4 different cables that I had using three cat 5e and one cat5. And all worked on that cam.
None worked with the new cam and in the cable tester on the switch shows a open cable.
I don't have BI up yet with new settings. I had to change from DHCP to static, so I was scratching my head on all that.
I did cover the light sensor and I heard no clicking noise.
192.168.1.108 comes up nothing in MS Edge.
AND I am not that experinced in all this networking stuff.
Any ideas?
Thanks