Hello folks.
I would like to ask you for some kind of help. I made a system with NVR DS-7732NI-I4-16P(B) and 8pcs outdoor DS-2CD2646G2-I. There i have also 6pcs DS-2CD2145FWD-I-4MPix in the system but i am having a problem only with outdoor cameras.
When i set up all parameters for line crossing - area (lines), arming schedule (0-7 / 17-24) and linkage (email+app) - its saved for 2-3 days. Then arming schedule is overwritten to default values 0-24 and trigger boxes in linkage tab are not checked anymore and i have to set up both these tabs again - arming schedule and linkage boxes.
Do you have any idea what to check/see? Does not matter if i am making new settings via NVR, Hik-Proconnect or remotely via IP. Everytime is going back to default values. Strange is that i am not having this problem with indoor cameras, there is settings still stored like i did it months ago...
Thanks for help. Martin
I would like to ask you for some kind of help. I made a system with NVR DS-7732NI-I4-16P(B) and 8pcs outdoor DS-2CD2646G2-I. There i have also 6pcs DS-2CD2145FWD-I-4MPix in the system but i am having a problem only with outdoor cameras.
When i set up all parameters for line crossing - area (lines), arming schedule (0-7 / 17-24) and linkage (email+app) - its saved for 2-3 days. Then arming schedule is overwritten to default values 0-24 and trigger boxes in linkage tab are not checked anymore and i have to set up both these tabs again - arming schedule and linkage boxes.
Do you have any idea what to check/see? Does not matter if i am making new settings via NVR, Hik-Proconnect or remotely via IP. Everytime is going back to default values. Strange is that i am not having this problem with indoor cameras, there is settings still stored like i did it months ago...
Thanks for help. Martin