HKVS # help
? - alias for 'help'
arc_go - start application at address 'addr'
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
dhcp - boot image via network using DHCP/TFTP protocol
echo - echo args to console
editenv - edit environment variable
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
format - format flash except bootloader area
go - go xxx.bin thru network
gos - go xxx.bin thru serial
help - print command description/usage
iminfo - print header information for application image
imxtract- extract a part of a multi-image
loadb - load binary file over serial line (kermit mode)
loadk - load kernel to DRAM
loadm - load mini to DRAM
loads - load S-Record file over serial line
loadss - load safe system
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing address)
mmc - MMC sub system
mmcinfo - mmcinfo <dev num>-- display MMC info
mtest - simple RAM read/write test
mw - memory write (fill)
nfs - boot image via network using NFS protocol
nm - memory modify (constant address)
pinctrl - Pin Ctrl
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
sf - SPI flash sub-system
sleep - delay execution for some time
source - run script from memory
sspi - SPI utility commands
tftpboot- boot image via network using TFTP protocol
upa - update app image
update - update digicap.dav with net
updateb - update bootloader with net
updatebsd- update bootloader with sd
updatesd- update digicap.dav with sd
upf - update firmware with net, format and update (factory use)
upfsd - update firmware with sd, format and updatesd (factory use)
upk - update uImage
version - print monitor version
wdt - WDT utility commands