My knowledge of this stuff is very limited. I have a NVR5208-8P-4KS2E with IPC-T5442T-ZE cameras. I've set up Tripwire and Intrusion rules but I'm not getting any alarm notices. I went under MAIN MENU>AI>PARAMETERS>IVS and created my tripwire and intrusion areas. And as far as the arm/disarm periods, I imagine the armed periods are in color and disarmed periods are black. I just know the color blue is the default for all periods but is that armed? Is that all there is to it, because when I walk across the tripwire and intrusion areas on my front lawn, I get no alarm notices?
How do you setup Dahua AI Tripwire Intrusion and get an alarm?
- Thread starter sdnomad
- Start date
I looked under the nvr's main menu>cameras and the many cameras sub menus and can find no e icon.
bigredfish
Known around here
Read and study
ipcamtalk.com
***PSA for those with a New DAHUA NVR with Built-in PoE switch
IF you have a Dahua NVR with built-in PoE switch... DO NOT follow instructions telling you to use the config tool or switch the IP of your cameras or initialize anything..! With NVR's typically with a -P designation (Built-n PoE switch - example: 4208-8P-4KS2) none of that is required and it...
When you say do I have notifications turned on in the "app", if you mean the nvr's main menu, I don't know what notifications that would be. I'm just trying to get it to record an AI notice when you review the recorded history. When I draw a tripwire and go outside and walk across it, the person inside looking at the tripwire line I just drew said it did not change colors. It remained yellow.Hi, do you have notifications turned on in the app? Does the trip wire flash red when someone walks across it?
DahuaWiki
dahuawiki.com
sebastiantombs
Known around here
Did you turn on the light bulb under ivs for each camera D1-Dxx ? Also under storage>schedule you should see a solid blue line and a solid green line for each day and for each camera D1-Dxx . This will give you 24/7 ivs notifications. But if you want to set specific times of the day for ivs, you have to login to each camera and set it . It never works via NVR.
Last edited:
I think I am closer to getting it to work thanks to your instructions. Tripwire trigger seems to be working and I'm now getting tripwire recordings. The next thing I want to set up is getting push notifications to my cell phone.
I found the blue lightbulb under AI>PARAMETERS>SMART PLAN. I did not have that turned on so I turned it on. (see below) Looks like you can turn on face detection or IVS Tripwire but not both at the same time.
I also found where to set the blue and green lines under STORAGE>SCHEDULE>"gear icon" (see below)
I cannot find where to log into individual cameras. This is all I see when I click on the camera menu. I'm just beginning to set this up so I only have one camera connected so far. (see below)
Attachments
Last edited:
If I make too big a mess of things, is there somewhere to reset all back to factory defaults? I have not run any updates on anything so far.Read and study
***PSA for those with a New DAHUA NVR with Built-in PoE switch
IF you have a Dahua NVR with built-in PoE switch... DO NOT follow instructions telling you to use the config tool or switch the IP of your cameras or initialize anything..! With NVR's typically with a -P designation (Built-n PoE switch - example: 4208-8P-4KS2) none of that is required and it...
bigredfish
Known around here
What is the best way to get cell phone notifications of alarms from Dahua tripwire, intrusion, etc.?
bigredfish
Known around here
The DMSS app.
As far as I can tell it requires you to setup and use Dahua’s P2P service on the NVR. Something many of us aren’t real keen on and a quick search will show isn’t always reliable.
Myself I use email alerts. Get them within seconds (May depend on your email provider) with a snapshot
As far as I can tell it requires you to setup and use Dahua’s P2P service on the NVR. Something many of us aren’t real keen on and a quick search will show isn’t always reliable.
Myself I use email alerts. Get them within seconds (May depend on your email provider) with a snapshot
I set up my email for alert notices but I wonder if it will work come May 30th 2022 when Google will no longer support the use of third-party apps or devices which ask you to sign in to your Google Account?
Less secure apps & your Google Account - Google Account Help
Starting January 2025, less secure apps, third-party apps, or devices that have you sign in with only your username and password will no longer be supported for Google Workspace accounts. For exact
support.google.com
Already a thread created about it and how to fix it. Create an app password.
ipcamtalk.com
GMAIL to no longer allow less secure apps
This might affect many folks here that use GMAIL in their NVR or Blue Iris for notifications. Less secure apps & your Google Account To help keep your account secure, starting May 30, 2022, Google will no longer support the use of third-party apps or devices which ask you to sign in to your...