ok cool, that is exactly what I do. I make all my changes on the camera, not the NVR. I've been tinkering with it and I still can't figure out why it is triggering.Some settings are only available on the camera, so its always best to make ALL setting changes on the camera, Save, and Refresh, pushing the settings back to the NVR. The only settings I do on the NVR are the recording schedule and NVR specific functions,
Hmmm dunno.Had a similar problem with a bunch of IPC-T3241T-ZAS and a NVR4108HS-8P-4ks. Set up smart plan/IVS/tripwire/Human/Vehicle on all cams and SMD is stuck on motion alert with running man icon always being triggers when something non human or non vehicle moves. SMD is disabled in both cam web gui and NVR. Im thinking maybe the newest camera firmware from 2022 is not playing nice with NVR firmware from recent 2023 ??
can try that. So your saying it may not even be motion, just a glitch?Hmmm dunno.
SMD was one of the first things I suggested. And it uses the full scene. You may be into somthin
Maybe as a test tape a piece of paper over the lens for a day, walk around in front of it, see if it still alerts…
Seems like I already have similarly dated firmware. Also what is weird is that this was working great until a few days ago. Nothing changed. Didn't change any settings. Didn't mess with it in any way. Just blasted the siren one morning at 5 am and it been a POS ever since.Device TypeIPC-Color4K-X-3.6MM
System VersionV2.840.0000000.1.R, Build Date: 2021-06-11
I think there was a newer version I tried but didnt like what it did to the image, so I reverted back to this