Storing snapshots on a local NAS using the new GUI struggles

[105437]

I need someone to explain how this works. I had IVS tripwires on my previous 5442 cameras that would store a snapshot when triggered to my local NAS. In the new GUI on my 54IRs, I can't get this to work. I must be missing something. What I've done so far. I walk through this area and the camera triggers for both tripwire and intrusion, but no snapshots are stored on my NAS. Any thoughts about what I'm missing? Thanks!

1) Set up two IVS rules as shown.


2) Set up Auto Upload for Tripwire and Intrusion events as shown. Clicking "Test" results in "Succeed".

 

[ludshed]

I wonder if the new gui doesn’t support older nfs security.

 

[105437]

I wonder if the new gui doesn’t support older nfs security.

No idea. Hopefully someone has been able to do this, perhaps using a different method.

 

[TonyR]

If you don't receive a solution, could you FTP the snapshot to the NAS?

 

[105437]

If you don't receive a solution, could you FTP the snapshot to the NAS?

I didn't see a way to do that. Only option for Auto Upload is HTTP unless I'm missing it.

 

[TonyR]

Don't know about in your 541R with new GUI but in my IPC-HDW5442TM-AS the setup for FTP is found under "Storage" => "Destination"

 

[105437]

Don't know about in your 541R with new GUI but in my IPC-HDW5442TM-AS the setup for FTP is found under "Storage" => "Destination"

Yes, exactly. I replaced all my 5442s with 54IRs and I'm missing this function. Looking at the documentation, FTP is available for storing alert recordings but not snapshots.

 

[105437]

If you don't receive a solution, could you FTP the snapshot to the NAS?

Thanks, I finally did get this working.

 

[97JeepXJ]

Thanks, I finally did get this working.

Why quote and thank the bot when it clearly copied word for word the suggestion @TonyR posted?

 

[105437]

Why quote and thank the bot when it clearly copied word for word the suggestion @TonyR posted?

Sorry about that @TonyR. I'm usually better than that on here and failed to like your previous post. Didn't realize @FletcherHubbards is a bot? I ended up not using FTP. Instead, the storage option from the Picture section in the GUI worked for me.

 

[97JeepXJ]

I have no proof but the account seems to only repeat others

 

[looktall]

I have no proof but the account seems to only repeat others

It's quite easy to prove.
Just have a look through the post history and you'll see it pulling lines out of previous comments and reposting it.

 

[TonyR]

It's quite easy to prove.
Just have a look through the post history and you'll see it pulling lines out of previous comments and reposting it.

Yep, you are so right.

One here, he reposted part of @Injunfarian:

iOS push notifications stopped working

I previously had the error in my log about the check security. Read I needed to update I’ve updated to version 5.7.3.0. Still no push notifications on two iOS devices in which they worked previously. looking for guidance on my next step. thank you

ipcamtalk.com

Another one here, reposted the late @sebastiantombs:

Not able to see Text Overlay when viewing through ui3 in single view mode

Follow up... The two cameras in question with the overlay issue were set to H264. I reconfigured the cameras to H265, and was then able to return to 'direct-to-disk' and the overlays show up in UI3

ipcamtalk.com

Probably more.

 

[TonyR]

If you don't receive a solution, could you FTP the snapshot to the NAS?

How much wood would a woodchuck chuck if a woodchuck could chuck wood?
Now where are you going to copy and paste that, numbnut bot?

 

[looktall]

Probably more

He seems to like you from the few i checked.

 

[TonyR]

He seems to like you from the few i checked.

Please don't tell me "great minds think alike"

 

[97JeepXJ]

It's quite easy to prove.
Just have a look through the post history and you'll see it pulling lines out of previous comments and reposting it.

That’s what led me to the conclusion it’s a bot