Sunfox
Getting the hang of it
Weird. I literally do not have that note in my interface.
Weird. I literally do not have that note in my interface.
Thanx ..I will ask them if can support it or not.
For me it looks normal. The 425 version does not track better. You will notice the same problem.May be in SD4A216DB-HNY uses lower power CPU. I also seen that many tracking issue while auto tracking objects.
can you post your encoding settings (full screenshot for main and substream) ? looks like vbr/low bandwith issue to meСan anyone test RTSP stream from SD4A***DB-HNY camera? From my SD4A216DB-HNY camera RTSP stream not work properly. I have issue with drops packets while RTSP works.
I think this is hardware problem with ethernet port on camera. I have another camera from Dahua and 8 mbit RTSP stream works fine.can you post your settings ? looks like vbr/low bandwith issue to me
On the eth interface the same issue..If You have wonky WIFI, that will be results...
I would like to test camera directly from PC to camera via patch cord. If they are the same problem, i would like to RMA this camera. May be on next weekend i will try it. Thank you.computer connected via lan or wifi ? camera network cable might be bad, or wifi problem
If it isn't a cable/ethernet/WIFI problem, it can be simply wrong hardware, wrong/faulty firmware or lack of CPU power on camera to send another stream over UDP.On the eth interface the same issue..
I would like to test camera directly from PC to camera via patch cord. If they are the same problem, i would like to RMA this camera. May be on next weekend i will try it. Thank you.