Recent content by Byousefz

i replaced the camera and it worked. seems like the camera was faulty

I did not make the cable, the surveillance company ran it and crimped it. I tested this again with another camera I swapped out, which is also about 30’ long.

Hi Everyone, I have a DS-7732NI-I4 / 24P NVR installed and it works perfectly with my 16 DS-2CD2132F-I camera's. I just purchased a DS-2CD2385G1-i 8MP camera. It works perfectly fine when I connect the camera to a 2' long patch cord directly form the NVR. But when i connect it to a 30' long...

hi everyone, i was able to flash all the cameras with the TFTP server easily. i ended up connecting the PC to a poe switch to the cameras. it wouldn't work with the poe injector for some reason. i also set the local ip to 192.0.0.128. thanks everyone for the help, hope this helps out other...

i tried the reset tool, its the same codes that hikvision support gave me. I get a green check mark saying the password has been changed, but i still cant change parameters (enabling dhcp, hik connect, ip address or any of the ports). it seems like my only option is to use the unbricking tool

I wasn’t able to recover the password. I have it back to the distributor to send to hikvision for repair. I’m in ny

I wasn’t able to login to the nvr anymore, all the usernames were random characters. Only The hikvision app was still working and I was able to view the cameras. But each camera name was also jarbled with random characters. Now I bought a new nvr

It won’t affect the nvr? Last time I tried to update the firmware on the nvr (which I did incorrectly) not only did it brick the nvr, but all the cameras got affected too

i tried connecting the camera do a POE switch from my computer and trying a hard reset - didnt reset the firmware. i also tried running SADP through the injector, same thing comes up. Do I have to unbrick the cameras? if thats the case then i think ill just replace all of them - its too...

Only one of them says min-system. The others have the proper model number/serial

I tried updating the nvr firmware a few months ago. Instead of updating in steps, I jumped to the newest one and bricked the machine. However i was still able to connect to the nvr through the Hik connect app and view the cameras. I have since replaced the nvr and now none of the cameras work...

I’m going to pickup a poe injector tomorrow. What would be my next steps to resolving this?

I have 16 hikvision ip cameras and they’re all having a similar issue. They all have version 4.0.8 build 150401 on them. I was told by my installer that they’re all original American hikvision cameras, and not chinese. I can’t login to the camera through it’s ip. I tried the password reset and...