Recent content by Dave82

Yeah the PC parts are pretty pricey also but second hand you can pick up a few bargains. I just wanted to move away from the requirement of having to use proprietary parts hence putting a system together. If something fails then it isn't as hard to replace. It took me a couple of weeks to track...

I wish I could find an elitedesk for around $200. They are double that here most of the time.

Just looking into it and I can even update the bios on the b150 board and run a 7th gen chip. A few more of these going around that are readily accessible.

So I changed the PSU on my system and that didn't work. I figured maybe it was a dead MB so I picked up a refurbished b150 Asus board with a new case and PSU so I no longer had to worry about using the proprietary PSU, CPU fan etc. Put the system together using the same HD, SSD, RAM and CPU...

Seeing as i'm using all 4 ports out of my modem running to different PC's and switches which then go to TV's and other devices I should probably look into running 4 of them I guess.

When you say ethernet protection do you mean for every line? or just the one that runs into the PC?

I reckon I bought the unit second hand as refurbished. So no warranty there.

Yeah I have a multi meter I just don't what I should be testing and what the readings should be. It's weird that everything else in the house is fine. Well as far as I can tell anyway.

Yeah sorry about that, it's an elitedesk 800 g2 with an i5 6500 CPU. No it didn't have a surge protector. I'm wondering if the psu crapping itself caused the power in my house to cut momentarily.

Hi guys, I have had my system running for a fair while with no issues. Yesterday I think I may have either had a power surge because the power went out for a few seconds and everything came back on except my CCTV PC. The green light still comes on on the motherboard but pressing the power but...

Ok I got everything working again. I tracked down an old post from someone having a similar issues. I changed my IP address (ipv4 properties) back to be in the same subnet as to what the cameras were in which allowed me to log into the cameras and change the IP address to suit the new subnet and...

Hi guys, So i have had my system running fine for a few months now and haven't had a hick up since I got it all sorted. Just the other day a new modem rocked up from my NBN service provider and they changed the service so that my old modem could no longer be used. It was just meant to be a...

@fenderman I am not quite sure what you mean. The time on the camera is the same as the time on the PC. It's just the recording bar that is half an hour out.

Yeah it sure did. I still have half an hour time difference between the clips and the recording bar though.

Cheers awsum140. That is done, I will wait to see if that reflects the correct times in the log next time it does a check.