Recent content by DigitalPackrat

The clip deletion has hit a few of us. In my case it started on 5.8.0.4 along side the memory leak, kept having issues through 5.8.0.8 and I didn't catch it till I was looking for specific footage. Reverting to last stable 5.7.9.12 and 5.8.0.2 fixed the issue till Ken replied to my email and...

Looks like a sunshade is what I need. Thanks. Wish I could do a zoomed in camera, too many things in the way.

I have an old 3mp poe dome cam mounted on a 4 foot tall block wall to monitor the alley behind my house due to some dumping issues. The dome is old and weather faded due to the sun pointing at it half the day. I had been thinking of getting a bullet cam with the theory that the bit extending...

There are no ports open on the Starlink side. The device on the Starlink side initiates the connection to a host on a more normal connection that has ports open. If both sides are Starlink or have similar CGNAT connections then you would need a third party with a open connection, perhaps a VPS...

I am not familiar with ZeroTier, OpenVPN is one of many options but is vary good about working with dynamic addresses and behind CGNAT like starlink. The main thing is you need to be able to bridge your two networks which is what a VPN does. The starlink side will need to initiate the...

I have a similar setup to what you described. Off grid vacation house with a few cameras and a local BI system recording at full resolution and a site-to-site VPN over Starlink where a lower resolution substream of the vacation house cameras is recorded on my local BI system. You don't...

The audio is low on the doorbell, I have the gain set to 140% to balance it out.

I had the audio dropping issue. Changing audio to RTSP alternate AAC decoder fixed it for me.

Yes, works fine on Win 11. You do need to install SNMP in Windows apps/optional features first. The one issue I have had with Win 10 and 11 is every major update, ie. Win 11 21h2 to Win 11 22h2 I have to uninstall then reinstall SNMP informant. Fortunately is is a quick install compared to the...

The sample graphs above are from my Win 11 BI machine.

I'm a bit old school but I have SNMP monitoring through CACTI for everything I care about on the network. On the windows clients like BI, I add SNMP informant to pull a bit more data. Its great for monitoring disk/CPU/RAM/network usage and uptime for the system or individual processes then...

Not familiar with the Supermicro switches but most likely you need to attach to the serial port to setup an IP, what VLAN and ports it is accessible from and user/pass. After that you should be able to use telnet and the web interface if it has one.

I installed CUDA 10.1 with update 1 and 2. I did uncheck Visual Studio.

I fought the "DeepStack has been restarted" issue for a few hours after switching from CPU to GPU. What fixed it for me was running deepstack from the shortcut in start menu after stopping it in BI. Running deepstack from its shortcut brought up some firewall exceptions to approve then GPU...

That's why I went with water cooling on this upgrade. I had been using 1u active heatsink in the last few builds on i7 8700k, i7 6700k, i7 4790 and E3 1275 v3. The system will probably change again in the future, I tend not to leave things as they are and I have a i9 10850k that will probably be...