Recent content by hltljohn

  1. H

    Problems shutting down and updating

    I was having the same problem recently. I determined that if I shutdown "Blue Iris Tools", the BI update would work perfectly.
  2. H

    Can presets have their own trigger zones?

    Camera PTZ/Control tab, Select a Preset, Under Motion detection, Select Override motion zones, Select Edit.
  3. H

    Upgraded BI4 to BI5. Event Schedule profile selections inverted

    Yes looey2ns. But, in BI4 the first scheduled item in the above sample has all profiles selected. When I start BI5 I get all grayed out, or not selected in the second sample. I don't want to have to go through and change all of my event schedules just because I upgraded to BI5.
  4. H

    Upgraded BI4 to BI5. Event Schedule profile selections inverted

    I recently decided to upgrade my BI4 to BI5. I had hoped that all problems with upgrading had been corrected. What happened is that all of my scheduled events quit working. Since I hadn't deleted BI4 yet, I ran BI4 and all scheduled events worked as programmed. After testing I concluded that...
  5. H

    Some cameras have an asterisk against them?

    The camera that has the asterisk after its name is probably a clone. All of my clones have that asterisk.
  6. H

    Blue iris Panning option

    Auto-Cycle patrol
  7. H

    Manual recording location

    Depending on how you have your recording combine and cut settings, the manually recorded video may just be included inside your normal combined video, and no extra clip is created.
  8. H

    Cut parts of BI clips

    You might try searching the word "export" in the help file.
  9. H

    Cameras and Clones swapping

    Try disabling then re enabling the clone that has the bit rate.
  10. H

    Cameras and Clones swapping

    Yes
  11. H

    Cameras and Clones swapping

    The word "group" is a little confusing because it is not the same group as camera groups. The "Designated group master" indicates that this camera is the only camera with the same IP that will pull a stream.
  12. H

    Cameras and Clones swapping

    Make sure that you have the original cameras marked as "Designated group master" on the camera video tab.
  13. H

    Test run video through motion detector and profiles

    Try changing the profile before you run the clip.
  14. H

    Test run video through motion detector and profiles

    You are correct, the clip does not save the profile setting. When you run the clip it uses the current profile. But, you should be able to change Blueiris to the profile that was used for the recording, then view the clip using the correct settings for the clip.
  15. H

    Automatic export of alert video snippet

    Not sure if this is would work for you, but I send myself an email with an attached MP4. This is setup under alerts. It only allows a 30 second video, but usually captures all I need. The email server then has a copy offline, and I can retrieve from anywhere.
See more
Top Bottom