Thats probably the best tactic.
Some camera/s for show and some hidden so if the thief tries to sneak past the show camera they will still get caught by the hidden ones as you wrote.
Most of mine are discrete mostly becouse i want a shot of the perp before he gets a chance to mess up the...
Thought i report back that it works great outside in cold weather. We only have -10C thought, will see if it gets any colder. February is usually the coldest. Mayby -15C later.
No indication of any problems so far atleast.
Hard to say what is wrong. Mayby someone here on the forum has experience with that brand. I could not see ONVIF in the specsheet but if you got it working before its strange it drops out. Hope that firmware-update fixes things for you. Dont have any more advice :(
Starlight and STARVIS are two separate things. A camera can have both or only one of them.
STARVIS is the sensor but they have different sensitivitys. What you should look at is the LUX numbers. Lower lux is better.
I am quite happy with the epoe 8MP Starvis but they are nowhere near as good in...
They are wrong.. Those things does not affect being able to connect to cam on lan. I dont know what cams they are but i would probably check cables, switch the port that the cable sits in to another. Check for latest firmware. Do a hard reset and reconfigure. Mayby try different ip adress and...
Mayby some adress conflict that blocks traffic ? Have you tried different TCP port and IP numbers, preferbably outside of DHCP range ? For the sake of trying everything..
Let them be powered 24H and see if it goes away. Is the environment within camera specs ?
Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
If extreme cold there could be problems mayby.
Hello and welcome to the forums !
For such recommendation i think its best to list more specific what you want to do and the budget / camera. Network and computer skill-level also important. Brands are also country dependent. I like Dahua but it requires buying gear overseas (usually). Andy on...
Thanks for the clarification.
Btw fun story, when i first got the 1-4 POE Extender i thought it was broken. When i connected it nothing happend !
I also noticed it sounded like something was loose inside when shaking it. I opened it up but it was only the board that sits a little loose becouse...
I can report that the 1-4 splitter works fine for my two IPC-HFW5831E-ZE. This solution was the best as i only had to dig down one cable in the ground.
My POE switch does not support 802.3at so i had to buy an injector. I bought the D-Link DPE-301GI 1-Port Gigabit PoE Injector | D-Link
Works...
Do you have a link to the D-Link one ? I only need 2-ports but didnt know there was one.
Nvm i found it i think. D-Link DPE-302GE. They dont sell it in my country. Pretty expensive also.
The 1-4 Extender will do fine i think. Its good form factor.
I am no installer so dont know if this is "ok". Its a IP65 box that i will put the switch in. The box will sit under a soffit on my small shed. If it burns atleast only my shed will be ruined lol.
Its winter now so its cold out. Mayby i put some silica bags in to get rid of moisture ?