I have two cameras on my parents system, up-to-this week both recording continuously with no issues.
Now, one of the two cameras stops recording 30seconds after I start recording even though continuous recording is ticked.
I've restarted PC, updated BI, re-booted cameras but cannot seem to...
Is anyone still having issues with Error #0 when BIT watchdog detects BI5 is not running? I've read from page 34 and tried to manually point to files via settings. If BI running when I select Watchdog in BIT then I get Error#0 shortly after. Tried fresh installs of BIT, manually downloading...
Thanks for confirming I had a least in theory wired them correctly. I think it was a bad crimp from the previous connection but newly crimped connection working. Appreciate you taking the time to reply.
Thanks to Fenderman, the pre-made cable seems to have fixed the issue, although it was interesting as the previous lost connections were every few minutes during the day, but when the camera switched to IR, they were only every four or so hours (if not longer). Issue appears solved though.
I have three Hikvision cameras (2 x DS-2DC2042WD) & one new acquired DS-2CD2142FWD. All three have the latest firmware V5.4.5 build 170124 and a running at 1920x1080 with a frame rate of 8. All have been set to max bit rate of 6144Kbps. All three are using a 8 port (4 x POE) unmanaged hub. I'm...
I manage to sort it in the end. When Windows 10 asked to connect to network it wanted a shared connection with the Mac. This caused the error and conflict with IP address.
I changed to the non shared LAN connection of the parallels VM configuration settings and this produced a second IP...
I had a perfectly working BI system with remote access working correctly through port 7000. No issues at all.
I had to move the location of my Mac and make use of a Home Plug as a means of ethernet extending. I use Blue Iris via Windows 10 on a VM.
Since connecting through the Home Plug AV500...