Has anyone been able to get the DH-SD59430U-HNI to Auto Track ?
I have been trying different things for months, getting no where .
I bought it from Andy to be my best camera and specifically for Auto Tracking.
It just wont track.
Thanks
Yeah I have the SD59430U-HNI and it is worthless for auto-tracking, I have played with it for 3 months without much success .
And the reason I bought this from Andy was for auto-tracking !
Does anybody that has a DH-SD59430U-HNI have auto track working ?
I did the latest firmware update although things look more organized it still doesn't auto track any better.
Most times when someone crosses my 10 trip zones it never moves.
Thanks
Hey screwonbudnik20 does your auto tracking work? I have messed with mine for months and tried every setting possible with little luck.
If yours is working how is your set up?
It seems mine when its zoomed out it will track slow moving people, but in my yard at 50 feet or less it does little.
Thanks
I just got this switch last week, one SD29204UE on port one works fine the second a DH-SD59430U that requires 24 watts I have on port 2
The camera just goes into self spin mode back and forth and I cant get it to connect to NVR
I put it on a POE injector on port 24 and it connects to NVR there...
I spent more time on the DH-59430U-HNI PTZ camera today, i can connect it with a POE injector to the HP pro curve 2620 on a none poe port.
If i use a POE port that I increased the wattage to 30 the camera goes into spin mode, it will spin 360 stop than go back the other way.
I do have a low watt...
Well I found out I had to reset cameras to get the ip address to grab home network and than bring into my NVR
The first ptz went fine, the second my DH-59430U-HNI PTZ not so good
When i plugged into the poe switch the camera goes into spin mode, I cant push the reset button in while its turning...
Hi i just installed a used 24 port POE switch from Ebay
I have two PTZ cameras that were already using poe injectors and showed up on my NVR
After i plugged one of the cameras into the poe switch i don't see it in the nvr
I tried a manual add, that also didn't work
My question is my home network...
Is anybody using a Mac book to connect to their Dahua camera for setting up?
I tried chrome with its plug-in and its buggy, some settings wont save and you cant see tripwire or intrusion lines.
Safari and firefox it wont down load plug-in
Anybody get a Mac to work?