Has anyone been able to get the DH-SD59430U-HNI to Auto Track ?
I have been trying different things for months, getting no where .
I bought it from Andy to be my best camera and specifically for Auto Tracking.
It just wont track.
Thanks
Yeah I have the SD59430U-HNI and it is worthless for auto-tracking, I have played with it for 3 months without much success .
And the reason I bought this from Andy was for auto-tracking !
Does anybody that has a DH-SD59430U-HNI have auto track working ?
I did the latest firmware update although things look more organized it still doesn't auto track any better.
Most times when someone crosses my 10 trip zones it never moves.
Thanks
Hey screwonbudnik20 does your auto tracking work? I have messed with mine for months and tried every setting possible with little luck.
If yours is working how is your set up?
It seems mine when its zoomed out it will track slow moving people, but in my yard at 50 feet or less it does little.
Thanks
I just got this switch last week, one SD29204UE on port one works fine the second a DH-SD59430U that requires 24 watts I have on port 2
The camera just goes into self spin mode back and forth and I cant get it to connect to NVR
I put it on a POE injector on port 24 and it connects to NVR there...
I spent more time on the DH-59430U-HNI PTZ camera today, i can connect it with a POE injector to the HP pro curve 2620 on a none poe port.
If i use a POE port that I increased the wattage to 30 the camera goes into spin mode, it will spin 360 stop than go back the other way.
I do have a low watt...
Well I found out I had to reset cameras to get the ip address to grab home network and than bring into my NVR
The first ptz went fine, the second my DH-59430U-HNI PTZ not so good
When i plugged into the poe switch the camera goes into spin mode, I cant push the reset button in while its turning...
Hi i just installed a used 24 port POE switch from Ebay
I have two PTZ cameras that were already using poe injectors and showed up on my NVR
After i plugged one of the cameras into the poe switch i don't see it in the nvr
I tried a manual add, that also didn't work
My question is my home network...
Is anybody using a Mac book to connect to their Dahua camera for setting up?
I tried chrome with its plug-in and its buggy, some settings wont save and you cant see tripwire or intrusion lines.
Safari and firefox it wont down load plug-in
Anybody get a Mac to work?
If i walk through a tripwire from a stationary camera it will draw the ptz the the right preset, but than it stays there and wont track me as i walk around
After the minute i have set it returns to preset 1
Any ideas why it wont track ?
Hi i have a SD59230U-HNI, i have three presets with intrusion and tripwire in each preset
Should I have auto track enabled?
It seem to auto track some what but not like i would like
I thought i read on her to turn auto track off, so i did
I also used fixed cameras to trip the ptz ,it seem if i...
Hi i have a SD59230U-HNI, i have three presets with intrusion and tripwire in each preset
Should I have auto track enabled?
It seem to auto track some what but not like i would like
I thought i read on her to turn auto track off, so i did
I also used fixed cameras to trip the ptz ,it seem if i...
I have been trying to tweak my auto tracking,
I have 4 set cameras sending my 59430U to presets.
When the ptz goes to the preset it stays there, till another one of the stationary cameras trips and it goes to that preset.
I would like it to go back to a home position after, but it stays at the...
I have a Montavue system I bought 3 months ago, good friday sale 40% off.
It has been a good system so far I added 2 - 10tb drives and a few more cameras.
1x 4K IP Residential Camera System w/ 4 4K Bullet Cameras and 2 4K Dome Cameras - 30fps @ 4K, 2TB HDD, 200ft Color Night Vision, Vandal...
Ok i feel like a idiot, I am a idiot!
When i tried to format the disk, i didn't check the little square.
Once it formatted it showed up as 9.07 TB drive.
I guess what surprised me is the last drive I installed it didn't require formatting.
Thanks for the help mlapaglia, and maybe my struggle...
I can feel the drive spin.
In HD manager it shows health status, unformatted, free space zero, total space zero.
In HD detect i did a manual detect fist square is red the rest green, red being bad
It does show in that total space 9314.00 GB
I tried to click format in HD manager but it doesn't...
Sorry for the big picture
I still think on my nvr it doesn't need the tape, 4 wire SATA.
I think its a NVR problem, or something with these drives, I installed a 10 TB Security Seagate drive a month ago in the spare slot and it showed the first time it booted.
It makes sense i tried 3 different types of tape, everything looked fine after i pulled the plug off
My question is my sata connecter has 4 wires, from what I see one is 12 volts and one is 5 volts and 2 are common.
So mine doesn't have 3.3 volts and from what i have read the 3.3 volts if there...
When i had it connected usb I couldn’t hear it, but lights were flashing and drive showed up on desktop
In dvr nothing,
If dvr sata cable is only 4 wires does it even have 3.3 volts?
If it doesn’t then drive should just work
Isn’t it 3.3 volts that would shut it down?
I did tape the third trace
Still didn’t work, then taped all three 3.3 traces, still didn’t show drive
I put the usb stuff back on to make sure drive was good, it shows up as a external drive
Running out of ideas.