Search results for query: Reolink

So, I made what might have been a mistake, and bought 8 Reolink RLC-520s on Amazon today. At $38/ea, they just kind of screamed "buy me!" so I did. And then I started reading more about them... My use case is kind of an easy one - I have a 12 y/o who likes to take things that aren't his from...

8x Reolink RLC-410-5MP cameras were purchased to replace 8x 2MP Jovision POE cameras. However, BlueIris has never been the same again. Though the picture quality is better, everything else is problematic. Motion isn't detected properly. Playback is erratic. Triggers fire too late or not even at...

I have just plugged a Reolink camera into my router and downloaded the Reolink app to my Android device. As expected I can access the camera from the app while my device is connected to the same LAN as the camera. But to my surprise the camera is also accessable over Cellular, with Wifi...

...should be fine for Blue Iris). Problem is, I can't find any cheap/affordable POE cameras that are not associated with companies like Dahua, Reolink, Hikvision, etc.... I don't want to get political, and I respect that people have different reasons for using different brands of cameras, and...

plugging it in the back of my amcrest nvr NV2108E-HS 8CH PoE does not work. so i plug the camera onto my network, and powered it via POE injector. rtsp:/admin:mypass@192.168.1.76/h265Preview_01_main works. the image is super clear but it lags horribly. my network is very fast so i am sure...

Before finding this group, I spent a fair amount of time researching a budget friendly camera system and came across Reolink. Seems like there is so much negativity about Reolink here. I purchased the RLK8-420D4-5MP system, ran my own CAT6 wire. Im getting to the stage where I can close things...

Some video samples of moving vehicles from RLC-510A video shot with default Reolink app settings and recorded on PC connected to the cam through PoE injector and Ethernet cable. Is it even possible to get readable license plates with this cam (record to SD card instead and/or tweak settings)...

...videos from all over i stumbled on the hookups channel and he sold me, hook line and sinker, on his best blue iris cam setup.. the dreaded reolinks (820a). Even after watching his "before you buy reolink" vids it's essentially a non-apology and justification for his highly misleading glowing...

I have 14 cameras ranging in price from $50 to $3500. 5 of them are Reolinks. Several of them are even in locations, like the attic, that are perfectly fine for what they do. One of them is a 410 on the west side of my house. The aperature is closed down very small even at night with IR which...

hallo evrey, Ich bin neu hier. Ich höre jedes Mal zu. heute ist es Zeit zum Schreiben. ich habe ein Reolink System, ich weiss, dass es viele Kritikpunkte für das System gibt. Jetzt zu meiner Frage: Wie kann ich einen nicht Reolink Kamera in Reolink NVR einbinden? Zb habe ich einen Imou Ranger...

Any recommendations?

...IP Address, but do to my facility and my preference to assign my camera's to a specific portion of my network. I have already reached to Reolink support and while they have respond it is clear they have very little understanding of Networking as this was the latest response to the same...

Is there anyone using day/night schedule that automatically changes when camera ir is turned on/off? I realized that I need different sensivity for motion detection at days and nights and think I will create a script that polls status of ir from the cameras but maybe someone have a better...

just wanted to post it here for anyone googling the same question still searching for good quality WiFi PTZ Camera that works with Blue Iris Unfortunately, Amcrest is a bit expensive and only in the US

A couple months ago one of my relatives bought a pair of Reolink turret cameras. Somehow he thought I had recommended them :eek:. I told him he should return them. He didn't. So now here I am with one of them to see if it will be useful. Hardware The entire mount is made of plastic. I...

...other not yet. I need advice on this other. My equipment is: NVR. HiLook Model 104-MH. In the loft. Consumer level 4 port NVR. Frontcam - Reolink RLC - 410 -5mp. Front fascia, 5m up. Bikecam - IPC D150 H-M. (This works) Rear motorcycle shed. Generic 4port POE switch. In the loft. A 24 port...

Hi all, purchased a reolink 8ch poe nvr, in the setup wizard when I arrived at the page network there is a box for default gateway, after putting it in and it says settings saved it hasn't saved it, tried several times always the same , I have even started afresh formatting the hd gone through...

I am looking for advice on a unique application. I have a Reolink NVR on my boat and would like to use some sort of Ethernet switch to connect an existing ray marine ip camera to the NVR so I could remote monitor using the Reolink app. The rub is I also need to leave the camera accessible to my...

Like many others on here, I made the mistake of purchasing a full set of Reolink cameras (mixture of RLC-820a and RLC-520a) to use with Blue Iris. I chose the Reolink cameras based on recommendations from 2 popular YouTubers, and while the quality of the cameras out of the box are acceptable to...

If I may ask.... 1) Does any one use a Reolink PTZ and can they get optical zoom working through BI. 2) For those using a camera to monitor wildlife. Do you camouflage the camera - that big white bulb is an obvious scare-baby! I was considering using strips of black ducktape, zebra-like...

Hi Everyone! I'm new to the site, but I wanted to share a current experience I am having with the Reolink 810A Camera. I recently bought two of them (bullet style), and added them to my system. I'm running Blue Iris, current version, and I have 6 cameras, which I will expand to roughly 15...

...My system is Ryzen 52600 16GB 2400mhz DDR4 GTX 750 Ti 256GB SSD for database 4TB WD PURPLE for New & Stored I run 4 Cameras 2 x 5MP Reolink rlc 511 - these are wired via Cat 6 to my Netgear GS116PP PoE switch 2 x 1080 Jennov ip cameras ran wirelessly The Jennov works fine and use the...

I have 10 Reolink RLC-410 cameras. I know that they don't have the best reputation for IP cameras, but they were what my builder included in their "technology package" and it's what I have wired and configured so far. I've recently learned about the benefits of "substream" RTSP for keeping CPU...

...hated it for a million reasons. upon doing some initial research I came across what seemed to be some of the more popular options on amazon (Reolink and amcrest and a couple others). I was just about to pull the trigger on a full Reolink setup but decided to see what the internet had to say...

Hi guys, Before i start: Yes I know you guys and your friends, dogs, cats and mother in law love Reolink (/s). Yes I know other brands are far superior. Yes I know the problem mostly is with the I-Frame settings that Reolink doesn't support. Yes I know how a search button works. So with that...

Hi, looking for some ideas of what to try. I have recently installed 4 Reolink cameras and the performance is shocking. I've been trying different things for a few days but getting nowhere really. Issues are very poor fps, intermittent gray/green screens in recordings. PC System is i7-8700K...

...you go bashing me for trying to use subpar cameras, not everyone can afford top of the line everything, besides the price was right. I have a Reolink RLC-410 and RLC-420 Poe cameras. I managed to get them onto my Hikvision DS-7616NI-I2/16P NVR. I get video. I am able to continuous...

Ordered an 820A the other week, noticed that when I add the camera to BI with two streams as individual cameras, substream @ 480 for 24/7 recording, main stream for motion recording @ 4k, the main stream framerate drops to almost zero. If I remove the substream, the main stream frame rate picks...

looking for two. If you have any,let me know. Thanks Disregard!! I've been shown the error of my way.:rofl: I would delete this post,but feel there is some good info here just in case somebody sees it.

Hi all i have a problem I've purchased a reolink 5mp 511 i have a zxtech onyx 25 channel poe nvr if i plug it direct via poe when i look it cannot find it if i connect it networking with its own supply the nvr will find it and i can chance the ip to the right network but i still get no video or...