go into the network settings on the computer that you are trying to access the browser controls and manually go in and assign the computer an IP address in the same range/classificaiton. IE if the NVR is set to a 192.168.1.40, then go in and manually assign your laptop into the 192.168.1.x. At...
The disc also includes a copy of the configtool which will allow you to change the IP of the camera as well. handy if you are configuring several new cams at the same time, or want to set static IP addresses to them.
I have used these to protect the POE cameras and NVR on several installs.
https://www.amazon.com/Ubiquiti-Networks-ETH-SP-External-Suppressor/dp/B00R20OIAY/ref=sr_1_1?ie=UTF8&qid=1507518839&sr=8-1&keywords=ubiquiti+surge
I recently installed some cameras and a NVR for a customer at his house.. he has contacted me and explained that he coaches little league football and wants to be able to record the practices with a fixed camera mounted about midfield and elevated. He wants to be able to take the video file...
Need a pair of them to make the connection.
https://www.amazon.com/Ubiquiti-NanoStation-locoM2-2-4GHz-Outdoor/dp/B00DCNRTAG/ref=sr_1_2?s=electronics&ie=UTF8&qid=1504392154&sr=1-2&keywords=ubiquiti+nano
I have had good luck utilizing the Asus monitors. decent size for the budget!
https://www.amazon.com/ASUS-VS248H-P-1920x1080-Back-lit-Monitor/dp/B0058UUR6E/ref=sr_1_8?s=pc&ie=UTF8&qid=1503426487&sr=1-8&keywords=asus+monitor
I wouldn't. you made a solid choice. EZ crimps work ok too, but can be finicky on the tip as they have the "guide bar" I talked with the Platinum rep last week during a training and he said they have created a new fitting and tool, but you have to purchase a new compression tool, along with...
Easy choice then.. This thing will drill through damn near anything you throw at it.
DEWALT DCD740B 20-Volt MAX Li-Ion Right Angle Drill - Drill Bit Sets - Amazon.com
https://data.kleintools.com/sites/all/product_assets/documents/brochures/klein/56326.pdf - Expensive but wont splinter like the LSD and cheaper rods.. I also like the case to carry my flex bits, rods, wet noodle, etc all in one place.
Where would one find these little gems Zero? Nice install! The only monitors similar to these that I have been able to find is a small 7" on a goofy desktop mount.
I use one of these regularly.. Powers the POE cams to aim, then you can tie each cam into your switch and configure your static IPs. Saves time and simplifies the process if you install cameras very often.
7 Inch cctv test monitor 6 in one Analog IP SDI TVI CVI AHD camera tester cctv tester...
Works like a champ until you run into metal studs, or conduit in the wall.. in my 8years of using my magnapull, these are the challenges where the good ol' glow rods still the perfect poison.
Grab a toner and save yourself some time and headaches.
Amazon.com: [Upgraded Version] ELEGIANT XQ-350 Line Finder Telephone Phone RJ45 RJ11 Wire Tracker Ethernet LAN Cable Tester: Office Products
I understand it has a built in mic, but my question was does it pass the audio signal via the POE ethernet connection, or do you have to run a separate shielded audio cable to carry the audio signal?
Thanks,
-tim