Search results

  1. L

    Remote viewing of clips.

    It looks like this morning's clips are playing correctly. I'll keep an eye on it.
  2. L

    Any luck with password resets?

    I'll have to connect it again to get the model and firmware version. I know it does show as Active and it does not connect to an NVR. It just connects to his PoE switch.
  3. L

    Any luck with password resets?

    Hey everyone, My brother has a Hikvision camera and water got in the Ethernet port burning out the connector. He cut it off and added a punch down connector. The camera powers on, I can see it in the SADP tool and if he types the IP address in his browser, he is taken to the screen to sign...
  4. L

    Remote viewing of clips.

    Here is my video settings page.
  5. L

    Remote viewing of clips.

    Thanks for answering. I have already checked that and they match. Maybe set the cam to defaults and set it up again?
  6. L

    Remote viewing of clips.

    Hey everyone, I knew not to touch anything, but I did and now I have issues. I had stated before that I'm using BI 3 and have had no issues for 6 years. Nothing, no crashes, no camera issues, etc. I posted a question about possibly upgrading to 5.0. I'm currently running Windows 8.1 with BI...
  7. L

    Blue Iris 3.0 Clips and archiving question

    Ok, so I had a stored folder that I thought I set to zero like you guys told me to do a million times, but I guess I never did. One more thing. Should I uncheck the Limit clip age for my Alerts folder as well or is fine set for 14 days?
  8. L

    Blue Iris 3.0 Clips and archiving question

    So I tried what you suggested, but it is still red. I deleted all of my clips. I deleted all files in the DB folder. Still shows red. I restarted the computer and BI, still red. See screen captures. There is one clip now as I performed a manual trigger just to see if the clip saved. Also...
  9. L

    Blue Iris 3.0 Clips and archiving question

    I finally got around to doing this and I still get the red. One more thing now. Since I repaired the database, I can no longer remotely view any clips earlier than the time in which I rebuilt the database. I can view them if I remote into the PC and view them from Blue Iris, but not remotely...
  10. L

    Blue Iris 3.0 Clips and archiving question

    I'll give it a shot. Thanks
  11. L

    Blue Iris 3.0 Clips and archiving question

    Nothing. Just three folders. Two of which are empty and my clips. Alerts and Storage folders are empty. New folder is holding all of my clips. See attachments. As you can see, there is are 3.45TB free on my E: drive.
  12. L

    Blue Iris 3.0 Clips and archiving question

    So I quickly made the suggested adjustments and I'm receiving the red error I spoke about in my original post. I changed the setting to 3300gb and then 3000gb and then 2000gb and still got the error. Each time the number in red gets smaller. Any suggestions? Anyone ever see this...
  13. L

    Blue Iris 3.0 Clips and archiving question

    Thanks for the info. I already have plans to upgrade to 5.0, see here - Updating to BI 5.0 I pretty much have my setting set the way you have suggested. I will have to check #4 though. I will try to increase the allocation to 3300 Gb and see what happens. I'll look for a BI status clip...
  14. L

    Blue Iris 3.0 Clips and archiving question

    Hey, Thanks for responding. There is nothing else on the drive and the stored folder is on the same drive. The drive is solely for Blue Iris clips. Chris
  15. L

    Updating to BI 5.0

    Yep, that's how I have it already setup. Have a WD purple for clips as well. Thanks for the insight though.
  16. L

    Blue Iris 3.0 Clips and archiving question

    Hey everyone, I have a 4TB drive installed that I use to just save my clips to. I'm not too sure how to get the settings right to utilize the whole disk and I've never been able to get it right. I have attached a screen capture of my settings. I just increased the Limit clip age to 90 days...
  17. L

    Updating to BI 5.0

    Thanks for all the help again everyone. I have a spare 256GB SSD drive that I will take with me the next time I go to the house. I'll put that in, take out the existing boot drive, install Windows 10, perform the updates and any other configurations I need to make and see how far I can get...
  18. L

    Updating to BI 5.0

    Thanks for the replies guys. That's what I was afraid of. If I had the computer down here with me I could do the complete wipe and install and set up everything, but I don't want to spend my time up there doing just that all weekend. I'll have to think about it.
  19. L

    Updating to BI 5.0

    Hey Guys, Been quite a while since I've been active on the boards. I used to be very active on the original Blue Iris board a while back. Went by the name cgcmgr then. Well, I have had my setup running perfectly for years now and I've always been afraid to update from 3.0 (which I'm on now)...
  20. L

    Cams dropping video

    Well it is morning and everything is fine. Cam running at 10fps. I'm wondering if it is a heat issue. Maybe not with the camera, but maybe with the PoE injector. It was hotter than normal yesterday. Like I said, I'll swap out the PoE injector and see what happens.
  21. L

    Cams dropping video

    So its night time now and the camera has had video all evening. The cam was set to 10fps in the web interface and BI. It is currently hoovering around 6-7fps. I guess I'll see what happens tomorrow morning. Frustrating that it worked fine for 2 weeks and now this.
  22. L

    Cams dropping video

    Thanks for the response digger11. I was hoping the buffer increase would fix the issue. Maybe its a power issue. I have a spare PoE injector so I'll swap that out.
  23. L

    Cams dropping video

    Well, I made the changes to the buffer and I still have the same problem. I also rebooted the computer and rebooted the camera. I also deleted the camera and added it again. I'm still getting the decreasing frame rates and then no signal. It's really annoying. If anyone figures out how to...
  24. L

    Cams dropping video

    Hey Guys, Same problem just started with my Hik DS-2032. Hooked it up 2 weeks ago and everything was fine. Started to get some garbled pixels toward the bottom of the screen in BI in the last day or 2 and then a lot of signal loss today. I also can log into the web interface without any...
View older results
Top Bottom