Search results

  1. looktall

    Anyone seen this?

    Part of the new multivision range. https://www.dahuasecurity.com/Products/keyTechnologies/1102
  2. looktall

    POE Switch Question

    Data sheet I read suggests it can do basic L3 routing.
  3. looktall

    POE Switch Question

    Yeah some L2 switches will allow basic L3 functions like that. Probably not your basic entry level managed switches though.
  4. looktall

    Dahua DHI-NVR5864-4KS2 not support custom protocol

    It has a different version number to the current firmware. Is that a problem? The firmware version on my NVR is V4.002.0000000.7.R, Build Date: 17-07-2024
  5. looktall

    EmpireTech Security Settings

    A lot of nvrs these days just have a single network port and you're expected to plug both the NVR and your cameras into the same switch/subnet. But for some non Poe nvrs you can get them with two network ports. I assume one is wan and the other is for a camera Lan.
  6. looktall

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    Did you create the vlan using the UDM? There would be a firewall rule or traffic rule in there somewhere. If the vlan is create by some other device you'll need to look at the configuration on there. EDIT: maybe something like this... Action: Allow Source: <UDM Device> Destination: Local...
  7. looktall

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    allow the udm to see the vlan.
  8. looktall

    POE Question

    you're at the limit of line length for data continuity. The camera may well be pulling power, but if it can't send a data signal the power won't matter.
  9. looktall

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    I came across these the other day. https://ui.com/us/en/camera-security/special-devices Those multi function sensors and the poe lights look particularly interesting.
  10. looktall

    Putting BI and cameras on vlan subnet, but using BI server on main LAN

    It won't do that unless you configure it to do that. Two network connections of different subnets as you have done is the general setup advised by those here that use it.
  11. looktall

    EmpireTech Security Settings

    Does the camera connect to your router in any way? If yes, it's on the internet.
  12. looktall

    Alternatives to Dahua (NVR) web plug-in?

    You can manage what you need via SmartPSS, but i think they've discontinued that now in favour of SmartPSS Lite, which i'm pretty sure doesn't allow management of the remote device.
  13. looktall

    Turrets Mounted to Soffit

    In Australia that's the standard in virtually every house. I used these for mounting my cameras to fibre cement (and then just use the screws that come with the anchors to mount your camera) https://ramset.com.au/product/hollow-wall-anchor-flush-finish/ Save yourself the heartache and buy the...
  14. looktall

    Help with a Swann camera.

    Try looking in the camera settings directly.
  15. looktall

    POE Switch Question

    What sort of routing functions? That's a different kind of switch entirely. You'll need and L3 switch for that.
  16. looktall

    POE Switch Question

    Most managed switches will just work straight out of the box as a switch. But if you're wanting to use vlans you'll need to configure the switch.
  17. looktall

    Help with a Swann camera.

    looks like IR glare off a dome doesn't it? Maybe the foam ring has perished or slipped?
  18. looktall

    P2P Safety & Secure?

    Would you not just still use the p2p connection?
  19. looktall

    Be Honest

    Not really the same thing as a power cycle though. If the hard reboot didn't work, you should still try the power cycle.
  20. looktall

    POE Switch Question

    Most of the ones i've used before have a GUI. Some of them are enabled by default, usually the small business range. Not so much the enterprise models.
  21. looktall

    P2P Safety & Secure?

    Subnet is currently 192.168.1.x I intend moving the cameras onto a new vlan soon (something i couldn't do with my old router), will be interesting to see if it still tries that subnet. My other cameras that are trying to reach out to the internet are going to typical internet addresses and the...
  22. looktall

    P2P Safety & Secure?

    My new annke fcd600 constantly tries to make connections to the IP address 192.168.252.2. 13 times in the last hour. What's interesting about that is that it's trying to do it via the wan interface.
  23. looktall

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    Isn't this still in beta or at the very least still very early in the life cycle to be near enough to beta? I imagine there will be plenty of things not working as we would expect.
  24. looktall

    Turret side mount outdoor?

    I might two of my cameras exactly like in the first photo. They have some protection from the elements but not much. They're under a small overhang. Maybe 30cm. They've been out there for a couple of years now. Still going strong. Just keep the plug out of the weather and you should be right.
  25. looktall

    POE Switch Question

    Not always easy to configure either if you're using them as managed switches. I've never been very good at configuring via CLI. It just doesn't compute well in my brain. I prefer to use the GUI.
  26. looktall

    POE Switch Question

    Not exactly cheap though unless you're buying used. Having said that I have a Cisco switch for my camera network too. I would replace it with a unifi switch if I could afford one right now to go with my new UCG ultra.
  27. looktall

    IP Verification?

    Check your router configuration. There should be something in there showing connected devices. If you have two devices with the same IP they will generally block each other from working if they try to be online at the same time. But sometimes you will have one device working and one not, So if...
  28. looktall

    Hall of shame

    Nah just shit in the sink and wash it down.
  29. looktall

    Standalone TIOC 2 setup

    You will need to connect it to the network to be able to configure all of those things. Once it's configured i don't actually know if it will run on power only. you would need to remove the sd card to be able to review any footage. Is there a reason you don't want it on the network?
  30. looktall

    Century Link modem no VPN support, Replacement? or inbound VPN pass through possible?

    Perhaps check out my new favourite toy. https://ipcamtalk.com/threads/ubiquiti-networks-cloud-gateway-ultra.78028/ It does vlan tagging on the WAN port and can easily allow vpn access into your network.
Top Bottom