Search results

  1. rufunky

    Latest firmware Dahua NVR5216-4ks2?

    Anyone know what the latest firmware for Dahua NVR5216-4ks2 is? I got an update for my NVR4xxx-4ks2 that brought back .mp4 video save but I don't see that update for this version (current installed firmware is V4.001.0000003.2.R.201010 )...
  2. rufunky

    DVR camera works for a few minutes then this.......

    Thank you for the suggestion, I wasn't aware that was a common issue. It definitely could be the case as there was a leak right around that area.
  3. rufunky

    DVR camera works for a few minutes then this.......

    I didn't see a section specifically for DVR cameras so I hope this is the proper place to post. I am trying to figure out what is causing this office camera to go flakey. Steps I have taken: REMOVED WORKING CAMERA FROM SIDE OF BUILDING / TRIED ON CHANNEL 8 ( OFFICE CAM CABLE ) DID NOT WORK...
  4. rufunky

    Outdoor 4g poe router?

    Thanks, I will check them out. My biggest issue is finding a power source ( POE or DC ) that is ip67 or higher rated. I tried to get away with a standard POE wall wart and an in use cover over a receptacle but that didn't last long...
  5. rufunky

    SLOW CONNECTION ACCESSING CAMERAS FROM WITHIN THE NETWORK????

    Thank you alastairstevenson, I will give this a shot. I have to get another poe switch, I will report back with the results.
  6. rufunky

    SLOW CONNECTION ACCESSING CAMERAS FROM WITHIN THE NETWORK????

    Hey TonyR , I never saw that last message for some reason where he requested a layout. I did end up getting it squared away but I defaulted to my old way of setting everything to DHCP onsite and then making everything static. This issue is a occuring on another system all together. I still...
  7. rufunky

    SLOW CONNECTION ACCESSING CAMERAS FROM WITHIN THE NETWORK????

    Thanks for the reply sebastiantombs. I am trying trying to follow that last part " Just using one port for the switch makes that full bandwidth available for internet access and WiFi devices" maybe my coffee just hasn't kicked in :D
  8. rufunky

    SLOW CONNECTION ACCESSING CAMERAS FROM WITHIN THE NETWORK????

    I am trying to figure out what could be causing a slow connection to an NVR from within the network on both wifi and via ethernet. I have ruled out double nat.. It is a hikvision system The NVR is ds-7616ni-e2/16p, 8 cameras are connected to the back of the NVR the other 7 cameras are connected...
  9. rufunky

    Outdoor 4g poe router?

    Does ubiquiti ( or similar quality ) make a an outdoor 4g poe router?
  10. rufunky

    What app does Hikvision use for remote viewing?

    Thanks, I guess he's using ivms-4500 I will switch him over to the hik-connect.
  11. rufunky

    What app does Hikvision use for remote viewing?

    I am a dahua guy but I need to help someone out that has a hikvision system. Is Hik-connect the app to use for p2p connection via barcode? I also see people mention iVMS-4500 HD so I wasn't sure what one was there newest software. PS the reason for the p2p is they seem to be having a double nat...
  12. rufunky

    What brand cameras are people using in Government buildings since NDAA?

    What brand/brands cameras are people using in government buildings since the National Defense Authorization Act banned Dahua and Hikvision?
  13. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    One is the NVR the other is the NVR internal POE switch. I don't know why I had the gateway and IP as the same on the NVR switch...
  14. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    I thought in order for local computers to be able to access the NVR via the network that the NVR had to have an IP address in the range of the networks IP?
  15. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    Ok, so here are all of the settings. As you can see in the cameras registration, the cameras on the POE switch are being detected but when I click on the "live" icon it gives me an error "cannot find the network host". Even after I add the cameras the video boxes on the LIVE page show "Can not...
  16. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    I'm sorry, like I said I only know the basics of networking. I honestly up to this point had no idea what the subnet mask was for . On the nvr I used a subnet mask of 255.255.255.0 so I should change this?
  17. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    I was using that as an example as to not disclose the networks static IP to the internet. The NVR IP was not set up using that IP.
  18. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    Ok, so I tried to set up everything with compatible static IP addresses on my test bench but ran into a problem. The NVR is a 16 port 32 channel so 7 (23 in total) of the cameras have to be on a separate Poe switch. The 16 that it directly plugged in show up fine via the NVR. The seven that...
  19. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    Are you referring to the subnet mask? Its 255.255.255.252 according to the paperwork. I am not on the network to check.
  20. rufunky

    NVR/ IP cameras- Setting up static ips and proper subnets

    So, due to the different ranges of ip addresses and subnets provided by different internet provider ( IE comcast vs verizon etc ) I typically leave everything on DHCP until I have everything working on the network and then just change everything over to static with the current settings. I...
View older results
Top Bottom