Search results

  1. alastairstevenson

    Long plus camera

    OK - then there is a possibility that the camera has come with a fixed IP address in the 192.168.1.x range Suggestion, if the device doesn't show in the router's 'connected devices' list - Download and install ONVIF Device Manager - it's a useful tool to have anyway, but it will find any ONVIF...
  2. alastairstevenson

    Long plus camera

    What IP address range does your LAN use?
  3. alastairstevenson

    Eyeonet HDVR-62108

    Maybe here : https://www.ametagroup.com/eyeonet-recoder-firmware
  4. alastairstevenson

    Nvr5832-4ks2 BIOS

    The comment was for the benefit of others. Clearly you would know what it is ... Sorry, I would if I had it, but I don't.
  5. alastairstevenson

    How to upload videos from Annke AC500 camera to FTP server?

    From the in-built help info (not always the most reliable or accurate source) of Hikvision firmware, it suggests it's images that are dropped on to the FTP server :
  6. alastairstevenson

    Nvr5832-4ks2 BIOS

    OK - I think I understand. You are looking for a full dump of the NVR flash storage. The rt809h is a flash programmer - have you used it on the NVR flash and corrupted it?
  7. alastairstevenson

    Password Reset on IP Bullet Cam

    The board is helpfully labelled with what looks like a couple of serial UART connections - RX, TX, RX1, TX1 It might be interesting to hook up a USB to serial TTL adaptor (such as a PL2303TA based version) and see what the serial console is saying. I'd almost bet that it's fully open such that...
  8. alastairstevenson

    Nvr5832-4ks2 BIOS

    In that case I don't understand the question, sorry. Can you explain?
  9. alastairstevenson

    Nvr5832-4ks2 BIOS

    Maybe here : https://www.dahuasecurity.com/support/downloadCenter/download-search?keyword=Nvr5832-4ks2
  10. alastairstevenson

    NVR problem

    SADP operates using broadcasts so will find any device on the same wiring independent of what the IP address is.
  11. alastairstevenson

    NVR problem

    It's puzzling why the other NVR is showing in SADP. Can you confirm how your got the devices wired up? Also - point the browser at 192.168.254.1 and see what you get. Should be the 8-channel NVR.
  12. alastairstevenson

    NVR problem

    I'm guessing that you have the PC connected to an NVR PoE port and not on the LAN. Can you confirm?
  13. alastairstevenson

    Is my WD purple 6tb HD in trouble?

    This is on the problem PC? Dumb question - external, via USB? So hooked up to the USB 3.0 or eSata? And if external USB could also be checked on another PC?
  14. alastairstevenson

    Is my WD purple 6tb HD in trouble?

    Wow! That can really shift data!
  15. alastairstevenson

    POE NVR not providing power to devices

    No summer storms with lightning close by? These PoE NVRs, which unlike many items of electronic equipment have lengthy cabling attached to them, have lots of protection built in to protect against transient overvoltages that could damage the components the cables connect to. Sometimes, tough...
  16. alastairstevenson

    Is my WD purple 6tb HD in trouble?

    What does the HDD benchmark show on any other discs in the PC? (though I suppose they may be SSDs) How easy would it be to run the same HDD benchmark with the disc in another PC?
  17. alastairstevenson

    Hikvision ddns configuration setup for remote configuration

    Some useful reading, for the protection of your systems : https://www.ipcamtalk.com/wiki/how-to-secure-your-network-don-t-get-hacked/
  18. alastairstevenson

    FIRMWARE UPDATE

    I don't know if this might help - different NAS, similar problem :
  19. alastairstevenson

    IPC-Color4K-T180 troubleshooting

    A dumb question, for which apologies : Would that bear down on the 'tang' that's depressed on the male RJ45 that might leave it unclipped and the connector maybe loose? I know when I tightly wrap an RJ45 male to female joint with self-amalgamating tape I put something under the tang so it...
  20. alastairstevenson

    IPC-Color4K-T180 troubleshooting

    Good idea. Though not a huge number of errors, the expectation would be zero. It will be interesting to see if there is a low-level buildup.
  21. alastairstevenson

    IPC-Color4K-T180 troubleshooting

    OK, that probably lets out one potential cause of the problem! Long shot - swap the patch cord, re-punch the keystone ... but you've probably already done that. Do the port stats show non-zero error counts?
  22. alastairstevenson

    IPC-Color4K-T180 troubleshooting

    I'd guess it might be a cabling issue. Did you terminate the cable yourself? What termination standard did you use? What test method did you use? Did you test the camera before mounting it? edit What does the switch port log show for traffic stats & errors?
  23. alastairstevenson

    DS-2CD2342WD-I Password reset

    Good to hear! This little hack has been really useful over the years, helped lots of folk out! Not just for cameras, but also using the camera as a 'trojan horse' to pull an NVR password.
  24. alastairstevenson

    Hikvision DS-7732NI-E4 NVR - adding new cameras

    It might be a protocol incompatibility - that's a very old NVR with very old firmware, compared with the firmware implementation of those new-model cameras. There were quite a few incompatibilities with Ezviz cameras and that NVR model if I remember correctly. Provided it's not a Chinese NVR...
  25. alastairstevenson

    Hikvision DS-7732NI-E4 NVR - adding new cameras

    It might be a protocol incompatibility - that's a very old NVR with very old firmware, compared with the firmware implementation of those new-model cameras. There were quite a few incompatibilities with Ezviz cameras and that NVR model if I remember correctly. Provided it's not a Chinese NVR...
  26. alastairstevenson

    Hikvision NVR Virtual Host Question

    Brilliant! Well done for getting there. And posting about it, might help others in a similar position.
  27. alastairstevenson

    Hikvision NVR Virtual Host Question

    Interesting - The fact that you can access the cameras directly confirms that the routing configuration is working correctly. That's an unusual address range for the PoE-connected cameras, did you customise it away from the default values? And did you have to specifically set the camera default...
  28. alastairstevenson

    DS-2CD2342WD-I Password reset

    For the first camera, the password for admin=500bryant For the second camera, the password for admin=500bryant There is another plaintext password that does not seem to be linked to an account that you may recognise : 500bryantsthoa
  29. alastairstevenson

    Hikvision NVR Virtual Host Question

    OK, that's clear. With the caveat that I'm unfamiliar with those link devices - presumably they have individual IP addresses configured. That's what you'd be accessing in order to check on their status when a PC is connected to an NVR PoE port? If so, and their IP addresses have been set to be...
  30. alastairstevenson

    Hikvision NVR Virtual Host Question

    Did you try this, and what was the result? Are the links just being used as a cable extension, with the LigoWave ethernet port at the NVR location connected to an NVR PoE port?
Top Bottom