Search results

  1. onyxlinkia

    Dahua Turret Cam and Junction Box Installation

    Yea, the junction box is bulkier than this but I think it has more space to hide the cables? I already bought the junction boxes.
  2. onyxlinkia

    Dahua Turret Cam and Junction Box Installation

    Thanks, it's in the front porch, so rain won't be an issue, duct seal is what I'm looking for!
  3. onyxlinkia

    Dahua Turret Cam and Junction Box Installation

    Yes, it's the PFA130-E. It's in the front porch, so rain is not an issue.
  4. onyxlinkia

    Camera Setting to Improve the Quality

    I already read your posts before and had these set: H264 8192 bitrate CBR 15FPS 15 iframes But doing manual shutter didn't yield good results so I switched back to auto. I will have to play with the settings again.
  5. onyxlinkia

    Camera Setting to Improve the Quality

    Yea, it's current at auto exposure. It's very dark without porch light here, we don't have street light. The porch light has built in less which I can't swap out. It's turned on when the sun sets. The light you saw is probably from next door's.
  6. onyxlinkia

    Camera Setting to Improve the Quality

    This is my front porch camera(T5442T-ZE). Without the porch light, and just using the IR, the quality is much better. What should I do in this situation? The porch light is needed else it's too dark by the front porch. Can I force the IR to turn on at certain time?
  7. onyxlinkia

    Dahua Turret Cam and Junction Box Installation

    I haven't worked with turret camera and junction box before. I have some questions. 1) Can I install the junction box upside down instead of according to the top sign? 2) what can I use to seal the hole where the CAT5e is going thru? 3) does the camera installation looked correct ? Thanks.
  8. onyxlinkia

    WTS sold LaView LV-N9808C8E 8 Ch. Built-in POE NVR

    I'm selling my LaView LV-N9808C8E 8 Ch. Built-in POE NVR, it comes with a 3 TB WD Purple HDD. I'm the original owner and bought them brand new. The only reason I'm selling is because I upgraded my system, everything is still working as expected and in good condition. I used them in my living...
  9. onyxlinkia

    CodeProject.AI Version 2.0

    I only set it to detect person and vehicle on cam, only person in another cam.
  10. onyxlinkia

    CodeProject.AI Version 2.0

    Thanks for the video, very cool, didn't know i can set up that many trip wires.
  11. onyxlinkia

    CodeProject.AI Version 2.0

    Thanks, I will give this a try.
  12. onyxlinkia

    CodeProject.AI Version 2.0

    I just turned on code AI for my cameras. But it seems like it's giving me false positives for detecting people at night due to IR and spider web moving around.....how to correct this other than keep cleaning the web? I even turned on the accuracy to over 70%.
  13. onyxlinkia

    Install pipe under concrete driveway for less than 6 bucks!

    I have used this tool and method to install a PVC pipe under my backyard concrete patio. Not that much soil was washed out.
  14. onyxlinkia

    Can Noctua Low Noise Adapter work for Cisco Switch?

    The reddit switch is 3560G and belong to the OP, I have the 3560V2, only 3 pin.
  15. onyxlinkia

    Can Noctua Low Noise Adapter work for Cisco Switch?

    The stock fan is 3 pin, I have the 3560v2 switch. I haven't figured out how to suppress the error log via the console and there's amber light on the switch. As long as my IPCams are working, I'm good
  16. onyxlinkia

    Can Noctua Low Noise Adapter work for Cisco Switch?

    So, just want to share what I ended up doing. I tested with the Noctua low noise filter, didn't do much, I think the resistor was not rated properly for the stock fan. I ordered a much less powerful 3 pin blower fan from Amazon but it didn't work when I connected to the switch. I did more...
  17. onyxlinkia

    Connect two POE Switches

    Yes, I have done that as well.
  18. onyxlinkia

    Connect two POE Switches

    It was the cable. It tested fine with the cable tester but somehow it didn't work. Anyway, I replaced with another one and now everything is working.
  19. onyxlinkia

    Connect two POE Switches

    That I already did before, it's working it. The Cisco switch has 4 other cameras running.
  20. onyxlinkia

    Connect two POE Switches

    I thought it should be simple as well. I'm not sure if the Cisco switch is assigning IP address. I bought it used and use it as it is.
  21. onyxlinkia

    Connect two POE Switches

    I thought I could connect two together but somehow it's not working for me. House: Cisco managed POE switch, but I use it as default settings, no configuration. Garage: TP link unmanaged POE+ switch So, I ran CAT5e from Cisco switch to TP Link, then another CAT5e from TP link to IPCam...
  22. onyxlinkia

    Blue Iris Playback has Trailing Motion for Moving Objects

    I'm still seeing ghosting after making the changes in main stream and substream while viewing in blue iris, But if I export the video clip, it looked fine.
  23. onyxlinkia

    Hanging IPC-Color4K-T180 + Junction Box on Fascia Board, will it be too heavy?

    It's wood, thanks.
  24. onyxlinkia

    Hanging IPC-Color4K-T180 + Junction Box on Fascia Board, will it be too heavy?

    As I know, the fascia board is still in good shape, thanks for your feedbacks.
  25. onyxlinkia

    Hanging IPC-Color4K-T180 + Junction Box on Fascia Board, will it be too heavy?

    I want to install IPC-Color4K-T180 + junction box at the fascia board. I was told by Andy that they will weigh about 3.5lbs, is this too heavy for the fascia board?
  26. onyxlinkia

    Blue Iris Playback has Trailing Motion for Moving Objects

    I changed the bitrate to constant, frame rate and iframe to 15 Kbps.
  27. onyxlinkia

    Blue Iris Playback has Trailing Motion for Moving Objects

  28. onyxlinkia

    Blue Iris Playback has Trailing Motion for Moving Objects

    I viewed it from the BI interface in BI machine.
  29. onyxlinkia

    Blue Iris Playback has Trailing Motion for Moving Objects

    Weird, after I exported the video clip and viewed it via windows media player, it looked fine. This ghosting only happened when I viewed it in Blue Iris. Could be this be main and sub stream settings that I misconfigured? Here is the camera setting, please note that I have LaView camera but...
  30. onyxlinkia

    Blue Iris Playback has Trailing Motion for Moving Objects

    I just viewed some of the blue iris video playbacks. All of them have the trailing motion for moving objects at the beginning of the clip. What settings I have to change to correct this?
Top Bottom