Search results

Figures - I'm leaving for three weeks today and I lose video on one of the most critical cameras on my system. Not sure if there is any correlation, but yesterday I set up an old iPad with ivms-4500 for my employee to monitor while off site, and that is when I started noticing the issue. At...

OK. Thanks for the info. I think I'm leaning back to my original plan - running the aerial drop. Mainly because I think I'm going to run 2 lines for 2 separate cameras out there. One a dedicated LPC cam, and the other for general surveillance of the location.

Would 2 of these work? https://www.amazon.com/dp/B004EHSV4W?tag=ipctk-20

Yes - I might have gotten the idea from one of your posts. I remember searching and a member here had stated he had done multiple 400+' runs with no issues. I think he also said he used the Shireen for all his runs. Was that you?

No go on using the conduit to the sign. It has wires for my pole lights un there too. What about seeing up a wireless bridge? I'd be looking at a 150' distance from cam to building. This is the way the old cam was set up but, granted the cam/system was almost 10 years old, I felt the pic...

This thread has been a great read. I just ordered a Huisin v2 for my LPC cam for one of my business locations. I look forward to sharing my experiences.

Thanks nayr. I just need to decide if I should run it this way ( more involved since I'll have to bury it and set up the suspension system and run conduit down the light pole) or just sacrifice my small illuminated entrance sign ( It's only ~ 5' from my camera location) and use it's conduit to...

I have a camera going in at the entrance to one of my properties. Total cable length is ~ 300'. My issue is I need to run part of it aerially from my building, across the parking lot, to a light pole. Then down the pole and buried to the camera. I was thinking either Shireen or Ubiquiti...

Thanks guys. Hooked up the injector and it's running.

These are the PTZs I'm installing: http://www.ltsecurityinc.com/ip-camera/platinum-ip-network-ptz-camera-ptzip512x20ir.html

Thanks fenderman. Do you think I need the injector? Here is the switch I'm running: http://www.ltsecurityinc.com/poe-switch-poe-sw2402.html It's 802.3at/af and 30w per port. Thanks

Question about injectors and a switch. Coming up on installing my PTZ's and had some questions. It was suggested that "I run them (injectors) instead of going directly to the switch". 1. I would assume that the injectors are placed between the POE switch and the PTZ(in this case) camera...

Ok. I have a 24 port switch and 16 cameras, so that's what I'll do. Basically, should the NVR be connected to the router or switch? This is the switch I'm using : http://www.ltsecurityinc.com/more/po...sw2402l-f.html It has the 24 PoE Ports at 10/100 Mbps + 2 Gigabit Uplink. I assume I plug...

Not sure the correct way to set up my system, and what, if any, would be the benefits/drawbacks of each? How should I setup the router, switch and NVR? NVR Cable Modem---------> Router------<...

Thank you sir - I almost lost it when I thought I was doing it incorrectly.

This is my first install. Bought a Platinum Tools EZ-RJ PRO-HD and using thier EZ-RJ45 connectors. I'm following the B sequence - WO-O-WG-B-WB-G-WBR-BR The thing that I'm not sure about is from which side of the connector should the color sequence run. Looking at the connector with the cable...

Thank nayr!!

I need a display at a business location with a LTN8932 NVR and 16 cameras. What, if any, difference are there between the two (PC Monitor and TV)? What should I look for in a display? Thanks

Do you have the link to said tutorial? Great thread!

Hey nayr- I triend to send you a IM but apparently was unable. I seen in many posts you're a proponent of Dahua. I'm on the other side of CO and am setting up a 16 camera system for a commercial location, and am considering Dahua. I need the ability to pic plates day and night, and your...

I've read many people here champion the performance of 2mp at night. Is this absolute darkness performance, or reduced light - say 25% of daytime? Still not sure if I should buy 2 or 4mp's. Like I mentioned in my OP, I have a lot of lighting on the premises, so I was just curious.

Thanks fenderman. My only concern, is although the cameras range from 8'-15' in height, I'm concerned about water mist coating the lens. Would the turrets be any better/worse than the domes in this regard? Also, from my reading here, I've read that the lower MP cameras generally perform...

Hey everyone - my name is John. I've been lurking off and on the forums for a few months. I have a location with a 16 camera analog system ( 2 of them being PTZs) and I'm looking at putting together an IP camera system for a car wash. This will be my first system, and feel I can tackle the job...

Please send me a catalog please. Thanks for helping us all out!

Yeah, I'm going to outfit the 13 current domes with Hik 4mp. I was going to go with domes, from after reading your post, I remember reading a thread about how the turrets perform better?

Sweet. Thanks for the feedback. I'm going to upgrade an old 16 camera system at one of my car washes, and I think I'm going to employ 1-3 of these bad boys based upon the positive reviews. Heck. I'm almost tempted to outfit all 16 camera locations with them they seem like such a good deal...

What is the distance of the vehicle to the camera on those night plate pics?

I'm a real newbie here, and am learning as much as I can in preparation of upgrading one of my business locations as well as the future installation of my house. Will this camera work with a Dahua or Hik NVR? Will it record on motion?

I went through this very thing at one of my car washes. Repeated burglaries. They'd always be wearing a hood, or plastic bag over their head. I ID'd them via a license plate shot, but corroborated the plate shot with a facial pic taken from a Phylink PLC-128PW covert camera. It's about the...

Hi guys - Been lurking here trying to read & learn as much as possible. Hopefully I can tap some of the knowledge & experience here for my situation. Current system in one of my washes is a PC based ( EyeMax ) 16 camera analog system(2 being PTZ's). I like the interface on the software, but...