Search results

Good day everyone, Can someone explain to me why cloud cameras are so difficult to find? I have installed three cloud cameras from Reolink, which can be found easily with the reolink app, but only one with Blue Iris, A doorbell camera is not found at all, even though it works normally with...

Good day everyone, I want new software on this camera DS-2CD2032F because the software on this camera is corrupted . None of the above programs work, the problem is that this camera cannot be found with the search functions. Even with an IP Scanner you cannot find this camera and if you cannot...

Good day where can I find ''The Batch Configuration Tool,, I've searched all over the site but I can't find this tool. regards Adrie

thanks for your reply, The app is from Hikvision name iVMS-4200 client

Good day everyone, Can someone explain to me how I can put firmware on a Hikvision camera if I can no longer access this camera via the app, Regards, Adrie

Thanks for your reply, it looks like a current source to me where the current is stabilized and not the voltage just like the power supply of LEDs

Good day all together, A question about the power supply of a Reolink PoE camera. You can power this camera with a DC voltage of 12 volts via the DC plug. You can also power this camera via the LAN cable. The specification indicates that the PoE standard is 48 volts with the mention "Active"...

You can only change the camera settings with this program and not with a browser and for the sake of clarity, the camera itself works well and gives a good image

Thanks for the reply, I don't use a browser but the Hikvision iVMS program

Good day all together, A Hikvision DS-2CD2032F gives a good image Recording is also good. Just can't set the data, for example, the infrared cannot be switched off The settings in EVENT cannot be set, there is no image here either. The camera has been reset The fault message is HCnetsdk DII (7)...

thank you all for the reply

Good day everyone, maybe a stupid question. the IP addresses of my cameras sometimes change from, for example, 158 to 159 as the last digits. Why is that? I then have to look up the camera with an IP scanner to change the address. Regards Adrie

Thank you for your reply What I would like to know how it works technically. because I still don't know Here in the Netherlands you see a lot of those WIFI doorbells which also work in the cloud. All these people would know that they are giving unsolicited permission to access their LAN network...

Sorry

good day everyone, A question about IP numbers and access from outside in the own LAN network. When I install a camera in my own LAN network, I set the IP number and password of my camera to be able to see this camera in my network. I can't access this camera from outside with an app on my...

good day everyone, A question about IP numbers and access from outside in the own LAN network. When I install a camera in my own LAN network, I set the IP number and password of my camera to be able to see this camera in my network. I can't access this camera from outside with an app on my...

Good day all, if you want to view a camera outside your home via an app on your phone, you must enter the IP address of your modem and your password and a port number in this app You must also ensure that your modem also accepts this data. All this ensures that you enter the network that...

good day all together I have a Hikvision camera type 2CD2041 here this new camera is active in SADP and therefore you need to know the password if the camera had been inactive then you can enter the password in SADP yourself. apparently someone has already installed this camera once. resetting...

good day all together I have a Hikvision camera type 2CD2041 here this new camera is active in SADP and therefore you need to know the password if the camera had been inactive then you can enter the password in SADP yourself. apparently someone has already installed this camera once. resetting...

Sorry I'm going on vacation I'll come back to this problem later Adrie

thanks for the reply the camera is active so we have a problem how can we change that regards adrie

good day i have a hikvision camera type 2CD2041G1 I have to change the IP address and enter the password in the SAD tool it's strange you buy a new camera and nowhere can you find the password what kind of strange policy is this? who can help me the tools on this site do not work greeting...

thanks for the reply you are absolutely right, but Ispy is very useful for your local network. it is also a fairly good program to learn how to use IP camera. about the cheap chinese camera modules many of these modules are also used in the well-known brands. the camera I mentioned earlier is...

thanks to you all I know this program but also this program does not find every camera that also counts for many IP scanning programs some see everything that is connected to your computer and some only see a few most drivers that work with Chinese cameras are those of Escam and Hisung Ispy...

Thanks for the reply I'm talking about the built-in drivers in this case for example IP Camera viewer and I spy for desktop computers and IP Cam for mobile android they have a list of manufacturers / brands that you can choose from the best thing is of course an app or program that the camera...

Good day, I sometimes buy IP camera modules in China the problem is often to find the right driver for these Chinese modules is there a list of the mutually usable drivers. my most cameras work with the driver of Hisung but you will not find this driver everywhere which brand could replace this...

I know CMS is not the best software for cameras But I use it because it's simple to use Under device you can search for devices under internal IP addresses It shows which cameras are connected This function no longer works. The search field remains empty. For example, if I have another program...

For port forwarding, choose a port in your router that opens you to view, for example, a camera via WAN. Who can clearly explain why some cameras do not accept your choice of port and force you to choose a port that apparently is assigned by the camera. I have this with a hikvision DS-2CD2032F...

Thanks for the advice I opened port 80 in my router and now I have a picture on my phone. But it must be possible to choose your own port number. It is now that the forward port Is fixed by the Hikvision software It's a pity that you do not use this IVSM software Thank you for your interest

Well you are right i have disabled in the router this UPnP function And the camera was gone on the phone I switched it on and the camera was back But what to do now I will look into IVMS what the addresses are now as the router is disabled for UPnP In IVMS I have also switch off the UPnP...