Search results

Any chance they going to add Alexa or something support in the future :) ?

I am 3.4.91, it been a while since I messing with my Camera and NVR the current version is .96 is there any reason to upgrade?

Send me your address, I will post it to you for your research

ok I keep it in the junk bin, and if you ever visit down under I come out and hand it over in person :-)

Is this Any better? In Stock DS 2CD2T42WD I5 Original English Version 4MP IP EXIR Bullet Camera POE security replace DS 2CD3T45 I5 ipcam-in Surveillance Cameras from Security & Protection on Aliexpress.com | Alibaba Group

you can have my Bricked Cam to play. I am in Australia Tried the TFP method stuck after uploading the file, I gave up after 30 minutes waiting and the 2 red light stay on permanently now when I turn it on.

Ok I bricked my DS-2CD2232-I5, what is a good replacement camera that works with 7608NI-E2/8P? I wouldn't mind pan and tilt option and prepare to pay more not Chinese hacked version

Thanks :) lesson learned

Probably I have no idea I bought it from ali express and the firmware is english when I got it also my camera is bullet typo There is no factory reset button on this camera either? Is there anything I can do? This is the Camera Multi language DS 2CD2232 I5 3MP Bullet Camera with Bracket as...

I upgrade to firmware 5.4 from 5.3 and now the Camera keep rebooting non-stop well at least I think it is as the NVR keep detecting it but cant get access to it and I see the camera infra red light lit up for a while during booting, then disappear and then lit up again and the cycle continue...

Hi Would someone recommend a decent camera for a front door entrance? I got a few Hikvision camera and nvr may as well get another Hikvision

I used English one, the upgrade is fairly smooth, didn't encounter any issue, after the upgrade, reboot, done and I did over the Web GUI not at the terminal

I follow link you post and setup static route on my router to route between NVR network and my LAN network

Thanks got it sorted

I took a gamble and upgrade it after reading a few more thread and it works perfect no issue Firmware Version V3.4.91 build 161220

Is there a way to use this camera in the NVR without using NVR subnet so it has its own IP local network address instead of the NVR one?

I got DS-7608N-E2/8P bought from Aliexpress about a year and half ago can I upgrade it to this firmware? http://www.hikvisioneurope.com/portal/portal/Product%20Firmware/Back-ends/Recorder/NVR/DS-7600NI-E1%28E2%29%207700NI-E4/V3.4.91%20build161220/External_NVR_V3.4.91_build161220Release%20Notes.pdf

What the default password for DS-2CD2232-I5?

Enable Virtual server on your NVR GUI like the picture below Go to your NVR -> Camera Management and you should see a link on far right like picture below click on the camera you want to configure to send email and pictures it will prompt you for the Camera password and username In...

ah crap I wrote the instructions then I post it but pressed the wrong and it disappear, I got to go but I be back a bit later and rewrite it and post it again for you

I got it working now, funny how I try for days I can't get it working then as soon as I post something on the forum and someone reply my mind sort of think differently and I try something different and it got it sorted. To get it to work, under schedule settings, click on the type of event...

No, I only have cross line and intrusion detection on under smart event so under recording schedule I set it to event 0-24:00 every day but it doesn't work

I have it set to event Or should it be something else?

I am having trouble getting my NVR to start recording based on smart event line Line crossing and intrusion detection. The event does trigger correctly with email sent but it doesnt record anything I try all sort of setting and cant get it to record. I can get it record on motion detection...

Ok I got it sorted, I change the streaming protocol from UDP to TCP, I thought UDP would be more efficent but it ain't working thanks for your help

PoE connection for power and network, it looks like a reoccurring thing now it turns black screen every day after I dont know how long (as i dont look at the screen all the time) but within a day

I got DS-2CD2335-I hooked up to 7600 series NVR but my main stream sometimes gone black screen. I sometimes has to cycle and power off the NVR and Camera to get it to work again but the sub stream is fine, anyone know what is up?

hikvision manual is the worse manual I have ever read, all they tell you what you already know by looking at the screen and dont explain any of the NVR function so someone new can understand what a certain function do. Most of the things I learn are from forum like these :-)

That works thanks for the instructions

Hi I got a hikvision 8 port camera with 2 camera plug in you can configure identical setting in term of motion detection, email, ddns etc.. on the camera (via virtual interface) and on the NVR. I was just wonder if you have to configure both the NVR and the Camera settings to be the same? or...