warning DS-7600NI-E1(E2) 7700NI-E4 V3.4.91 and V3.4.92

[Paul Arthur]

Hi every one just be careful installing update V3.4.91

my nvr is

1. DS-7608NI-E2 / 8P

i was running before this problem

1. V3.4.90 build161008

my nvr kept rebooting every 5 mins poe went offline i had to restart the nvr to get the poe to turn on

i updated to v3.4.92 same thing happen so i did a factory reset to stop it rebooting and after that i lost 2 ptz camera i had to update them to work with this update> so don't panic and make sure you have heaps of time to fix it around i did it at 12am and i got it working back at 1.40am

had to rest everything

 

[alastairstevenson]

so don't panic and make sure you have heaps of time to fix it

Good advice lol!
Interesting that resetting to defaults fixed the problem.
It looks like there could be inconsistencies in a configuration.
I have found the 3.4.91 firmware to be fully stable, like earlier versions. My 7816N-E2 has been up for 4 months with no restarts since I last updated the firmware.

Worth doing now, if you haven't already done it -
Make a backup of your final NVR and IPC configurations, via the NVR web GUI Maintenance page.
Configure your responses to the security questions for the 'Forgot password' new feature.

 

[Paul Arthur]

haha thanks yeah i was like SH>T i must go to bed but must fix it

i done a full backup etc and made sure i got the guidfile
and done forgot password thing also

 

[Paul Arthur]

UPDATE SYSTEM HAS FAILED AGAIN
it's Starts up then will not show any ip cameras again i restart it it shows all the cameras fine it fail and restarts after 3 mins to SHOW NOTHING again
restarted it same thing.

about to rest to TO FR and see if it fixs it

 

[binh25]

I am 3.4.91, it been a while since I messing with my Camera and NVR
the current version is .96 is there any reason to upgrade?

 

[Paul Arthur]

not really

 

[Paul Arthur]

i know have got a new NVR which run's hikvision 4.0

 

[Paul Arthur]

Hikvision Europe

 

[binh25]

Any chance they going to add Alexa or something support in the future ?

 

[Paul Arthur]

i did got told that
DS-7600NI-E1(E2) will be getting updated soon to 4.1
just a few bugs

 

[Paul Arthur]

not sure but can't see that happening

 

[grindtheory]

i did got told that
DS-7600NI-E1(E2) will be getting updated soon to 4.1
just a few bugs

Hi, looks like its available now? Anyone upgraded?
Hangzhou Hikvision Digital Technology Co. Ltd.

 

[alastairstevenson]

Hi, looks like its available now?

I don't see it for DS-7600NI-E2, just K51 and X-series.

 

[grindtheory]

I don't see it for DS-7600NI-E2, just K51 and X-series.

You’re right, sorry must’ve glazed over that in excitement! Hopefully soon!