Search results

I had found all this information in the logs, but as it seemed to me such basic information, I thought there was another section where the camera kept its internal logs related to what it did, and not with the accesses of the users and four other minor things :confused:. Thank you! This problem...

Excuse me, I had to leave the house for an ophthalmological check-up. I changed the FPS settings and also the bitrate, but it randomly restarted again. I will have to find a compatible power supply and check it out. This camera has the new interface and I don't know where the "maintenance" tab...

No, this camera does not have an SD card (it could be incorporated, but I did not put it in). And since sending the first message in the post, it has already restarted again.

Hello, good afternoon. I have this camera model PTZ85448-HNF-PA (large) which has been working uninterruptedly 271 days according to the camera information. Yesterday afternoon 4/18/2024 it has started performing random restarts, and in total it has already performed eight restarts, which has...

Hello again. @wittaj @EMPIRETECANDY First of all, you have to take into account that it is working at 1/3 shutter, so you already know that the images take time to process the movements because of its slow image capture. As you can see, in the web browser with the daytime camera settings and...

If I can tonight, I will try to test again, without changing any of the video packaging and compression parameters. Now record a video of him doing the daytime test. Thank you!

I don't know, but I understand that the image when working at 1/6 shutter is delayed because it is a very low shutter, but only the image would have to be delayed but I understand that the time would have to be sequential without interruptions.

I seem to have deleted the email warning of your reply, and I didn't realise until I logged back in to the forum. Sorry. For the day there is absolutely no problem, right now the camera is working at 12000kbps and works fine in the browser, in Synology and SmartPSS-Lite in all of them I can...

I still have the same problem, and no matter if I use the recommended browser or SmartPSS-Lite, the image still lags. I access the camera through Edge (with or without Internet Explorer support) and the image freezes and refreshes at a very slow and random interval, as if the computer doesn't...

Just by changing the shutter, the seconds start to lag, and if you use the PTZ functions, everything is delayed even more. I don't understand it, but OK. The problem is that this camera is also a bit "special", so I don't know if there are people testing the functions in order to make...

Yes, it is powered externally via a transformer provided by the manufacturer. @wittaj Written two posts above about Synology. I've also noticed that when I access the browser, if I don't touch any of the PTZ functions there is no problem. When I move the camera with shutter so low, everything...

@wittaj And I have to add that the recording is done on a Syno SS, connected to the same switch and the recording works correctly, I can even watch the live stream via SS without any problems.

Concretely this is happening, having the same video encoding settings during the day as at night. The only difference is that it is in night mode and the exposure is set to 1/3.

With this daytime setting, the navigator works correctly, and in the "Exposure" section it is set to automatic. The problem comes when it's night time and the exposure is set to 1/12, which I don't know if it's a bitrate problem. Any suggestions for this night time configuration?

Sorry for replying a bit late, the web page was not loading. The three cameras that are outside are connected to the same switch, and the whole home network is gigabit with all the Unifi devices. The only camera with this problem is this one, the other two cameras are Dahua...

Well, we mounted the camera some time ago and everything works perfectly (this is my father in the picture). Now I find a problem using all the compatible browsers, and it is that when I put the "live" view the image collapses and does not retransmit correctly, the seconds stop and the image is...

The final installation is getting closer. Today we have repainted the mast (galvanized structural tube of 2 mm 80×80×2 m) with the final paint after the primer, the total layers of paint of everything have been three, two of primer and a final one with good quality paint resistant to UV. We have...

I understand that this PTZ1A225-HNR-XA model you may have already seen, and it will not be to your taste because of the technical features. But the best PTZ without being a position camera is the SD8C845FG-HNF model, which is not really the biggest monster, but still quite big. Its technical...

Hello, good morning! @wittaj I hadn't noticed your quote, I found it by chance since I accessed forum and saw the symbol on the bell. I am also a quadriplegic guy! And I'm also going to mount the camera on the top of the house to have a full angle of the nature and the sky (although this...

Hello, good afternoon. I would like to ask which controls can be used via RS-485 protocol for a PTZ camera. I understand that you can control the PTZ of the camera, but are there other aspects that can be configured through this protocol? I'm thinking about changing the day/night modes...

Here is a screenshot of what a video surveillance camera can consume. These cameras are connected to a switch. The cameras are Hikvisio Color-Vu. The first one in the list is 1440p and the other two are 4K.

Hikvision cameras default to FPS = iframe, and I prefer it that way. In the cameras I have from Dahua, it was no longer the default as in the Hikvision cameras, but I changed the configuration so that FPS was the same as iframe.

Here you go, with lasers in 8MP, 4MP and 2MP. ;) https://www.dahuasecurity.com/Products/All-Products/PTZ-Cameras/Positioning-Systems

@bigredfish I have also seen that in the screenshot you have posted you have the temperature option activated. Have you checked if the temperature displayed by the camera is real? In my case, the camera shows 3° or 4° more than the actual temperature where it is located. I understand that this...

I was hoping to find an option with the same functionality as the privacy mask, which stays fixed on the image. Another thing that I also found a big difference between Hikvision and Dahua, is that Hikvision's privacy masks are more versatile because you can make different geometric shapes, and...

OK, I understand. In my case this option doesn't work for me because I don't have an NVR. Thank you. But I see that the custom title does not stay in place, but when I move the PTZ that title also moves.

Hello, good afternoon. I have searched the forum about this question and found absolutely nothing, I have also searched the internet and there is no result either. So I have opened a new post to ask about this feature. I was also looking for a feature to put words to the objects you see in the...

I don't know if Dahua's engineers and designers have been inspired by Wall-e, but they have made it in their own image. :lmao: Definitely nooooooooooot :lmao: I'll have to put up some spikes like these...

I'm thinking of incorporating some anti-bird spikes, because I can see that this is going to be a bird airport. I don't know if the shape of the camera will be a scarecrow by itself or what, but, well, maybe I'll have to put some iron wires to hide it. What do you think?

Yes, this publication is very instructive and I have it bookmarked and always make use of it. I didn't know that boy had died.