Search results

Thanks, I am incredibly pleased and impressed with what i can do with this software, i can imagine for serious security issues you HAVE to have backup. I think this is great. and soo inexpensive

I am curious as to what these high priced systems do better than Blue Iris. I think he has done a great job on this software and I don't know why i would like a different one. My only guess would be the number of cameras and the processor power it needs.

Thanks, That is why i was concerned. I did send a support question to Hikvision and they responded with it has no effect on it. I was just hoping someone had some years of experience with these. additional cameras are the correct answer.

if you are still looking

I have the Hikvision setup with 6 preset positions and then created a patrol which tells the camera to proceed to the presets at a specific speed and stay at each one for a specified time. This seems to be working great for now but I am concerned if this will dramatically reduce the life of...

Thank you for this it made my day

Are there any updates on new Android sticks to we should be using if this is still a good way to add additional viewing TV's to a system

Amazon.com : Lionvis 2.0 Megapixel PTZ IP Camera 10X Optical Zoom IP67 Waterproof Outdoor Day Night Vision Network Full HD 1080P Speed Dome Security Camera : Camera & Photo This seems to be a pretty inexpensive 10x optical zoom. does anyone have any experience on these or know who makes...

thanks guys

brilliant thank you, do you thinkg an Frys» Tablets» Tablets» #8563519 Asus 7" ZenPad C 7 Intel Atom 1.2GHz 1GB RAM 16GB 2MP Camera IPS Tablet wold be powerful enough

I have 12 cameras at various locations around our warehouse and would like to setup a tv/monitor to view a couple different cameras in specific locations. ie in the sales office i would like to mount a tv on the wall to show the warehouse and in the receiving i would like a TV to show the...

i like to have both overlays because a couple of the cameras don't have overlays that i can access. i do have it set to d2d but i still get the time in the bottom right side. i can't find where i formatted that or even if i did.

The BI overlay, I can set the cameras up to access the internet to get the current time

I cant see where Blue Iris gets the time it uses for the camera

I have BI running in our company and we have one other computer used for viewing only, i have purchased a second copy of BI for that computer as a discount price of $30.00 this gives that computer complete control of everything but it doesn't allow access to the recordings on the main BI...

This is an intel NUC so the fan is small. it didn't seem to have any problems. i did watch it go up to 75C when it was working harder installing Symantec and running the scan. but it quickly came back down to the m id 50s and low 60s.

Any thoughts on CPU Temperatures. I am using an Intel I5-6260. I currently have 10 cameras 3 meg running 10fps. The cpu utilization is 50% and temperature is between 58-63 Celsius. it feels kindof warm but it isn't increasing in temp with time (as of now) been running for 4...

We have approximately 12 of the 3mg pProHD and they are working very well and only minor problems. The motion detector is setup through BI and it works well. I have it sending texts to 3-4 employees when a truck makes a delivery and sets the motion off for 3 seconds. We do have 3 on the...

Thanks for the quick response. I have a computer i used for viewing and older i5 4250 and all the recording turned off. ut is did set the direct to disk and the frame rate to 10 fps if i went over 6 camera with this computer i would run at high 90s, but i was using this computer to un...

Hey guys, I am wanting to have a computer set up to view the 10-14 3 mg cameras. it will be on a managers desk and he will probably want to look at some camera at full screen for time to time. I looked at BP's program and i am not entirely excited about it as it froze up from time to time...

i could not find a way to highlight a group and remove it from a camera. i made one group up to see about it but now it is an opion in the BI viewer and show up with poor resolution. i would love to remove it be don't see how the fenderman directions let me. i oooked for a group are a where...

that the same with me, i have an amcrest ip4m and the HA seems to work with it. i didn't notice any benefits to running it though, my CPU usage didn't go down any. i am using an old intel nuc 4250 1.3 ghz and it can only take 5-6 cameras before it gets maxed out. even with recording...

Thanks, that is the product they suggested used in conjunction with their other products Hey Richard, Here is some info in regard to the alert system we chatted about earlier. You would start with the 2500 Driveway Alert Kit-...

WE have a long driveway into the back of our warehouse used for vendor to deliver product. The guys in the back who are inside the warehouse or are doing some othe task would like to know when a truck is backing down the driveway. Has anyone figured out how to turn on a blinking light or...

Thanks, I turned off the hardware acceleration and the ghosting went away on the live viewing. the replay of clips had ghosting bad. I have changed a couple cameras to save clips in 30 minute increments so i could email them is necessary and i could view them after they have been recorded

additionally i have the clips when triggered turned off as well, i am not sure if that did much but looking to save anything

i have already had the hardware acceleration on i changed the frame rates in both the Amcrest and Foscam Setup's and changed the preview rate to 10 FPS in BI >options > Cameras the recording is set to 5 FPS no one is using the remote internal viewing as of yet.

hardware acceleration already done i set the frame rates in both amcrest and foscam setups and the live preview rate to 10fps in BI options>camera currently the CPU is down to 66% this is without any remote internal viewing . mush better on the CPU Thank you so much. the 3meg...

ye i am using Direct to disk Intel(R) Core(TM) i5-4250U CPU @ 1.30GHz, 1901 Mhz, 2 Core(s), 4 Logical Processor(s)8 gb. 4meg amcrest ip4m-1025eb, 3meg amcrest ip3m-954eb Foscam FI8905E Foscam FI9826W Foscam FI9828W

i am hoping it is all due to version .15 i installed yesterday. my processor has been at nearly 100% since then. Task manager put it a little lower but is is way too high