Search results

I will try tomorrow.

We have all Hik-vision cameras and NVR(DS-7716) which replaced one that went bad. All the cameras were reset with a new one using SADP. All 16 cameras and NVR have same pw. The ip addresses for the cameras were set up with 192.168.0.x thru 192.168.0.y and the NVR with 192.168.0.203:8x Plugged...

A hard reset in the manner you suggested may not be possible because of the physical placement of the camera. Is there any other way? So basically your saying that the camera/s need to match up with the port they were originally setup. So when I replaced the NVR the camera/ss are looking for...

All the equipment is Hikvision. The NVR is a DS-7716 NI-I4/16p(B) - ipadrs: 192.168.0.203 Camera is DS-2CD2622FWD The camera is set to IP adrs 192.168.0.29 which conforms to the LAN. In the NVR the adrs for the camera is 192.168.254.31 with the Connect adrs of 192.168.0.203:65016 Note: The...

The camera is plugged into our network switch, the ipadrs of the camera is entered into the browser, userid/pw entered, and up comes the live view. The camera is then plugged into the nvr and the Abnormal Network error is received. There are four other cameras that do the same. The wierd...

The patch panel is basically couplers and coupling the rj-45 together.

We are trying t'o clean up a rats nest and installed a patch panel. Ten out of 16 cameras work and the others work intermittently which is driving me crazy. So my question is, is that patch panel a potential problem? mjj4golf

We have a DS-7716NI-I4 . 16P NVR that beeps wth three than beeps once. I am trying to silence it with no luck. I did init the hdd but it is still doing it. Is there a way to silence the beeps or point me to doc that tells me what the beeps mean? Or, how to temporarily disable iit? Mjj4golf

Ok, I attached two files: SADP Screen shows only the cameras that SADP sees but there are eight or nine other cameras not shown. The NVR config.. is included to show all the cameras are supposed to be online. There is one camera that is showing 'Abnormal Network' and the others giving...

Yes, I did it as you said in the previous update. Double clicking on the address brings a 'Can't find page error' in the browser as opposed to the ones with the Online status.

Thank you for your replies. I connected the laptop to the NVR and was able to see 7 out of 16 cameras. The other 9 say Öffline(IP Camera not available). There is a in unit lan adress(192.168.254.x) on the nine cameras. I checked to make sure the Poe was enabled for those and they were. Any...

We have 16 Hikvision cameras connected to a DS-7716 NVR(POE). The NVR had to be replaced but the pw's are not known. If I connect them one at a time to another switch, SADP can be used to get the xml file, send it to HIKVision for them to create a new xml file, and finally use SADP again to...

We are an end user with a DS-7716-SP NVR and has no power. I believe it is a power supply and would like to replace it but HikVision won't sell me one one because I am not a distributer. Is there any other place to go to buy one? mjj4golf