Search results

I ended up getting a free camera to product review (BV-Tech PoE IP Turret Dome Camera, UltraHD Outdoor IP Camera with Mic/Audio, Up to 98ft Night Vision, 2.8mm Lens (2K(4MP) Color) and it looks just like a IPC-T5442TM-AS-LED. I tried to upload the Dahua firmware to it from it's native GUI but...

I still haven't received anything yet - should it have arrived by now?

Unfortunately there aren't any of the POE cameras showing, only my two wireless IP cameras. It's like the NVR switch isn't even assigning them IP addresses

What current firmware should a NVR5232-8P-4KS2E be running?

The cameras all worked fine on my 4xxx POE NVR, the issue is with this 5xxx NVR. I have previously been able to hookup a laptop to the POE port to connect and get a DHCP assignment to the 10.1.1.x range from the internal switch on the NVR, and subsequently access a camera with an IP in that...

Connecting a laptop directly to the POE port I can't even get it assigned an IP address in the 10.1.1 range

I tried that earlier with no success, been troubleshooting since this afternoon. The internal 5xxx POE switch is set to 10.1.1.1 / 255.255.255.0 / 10.1.1.1, which is the exact same setting as my 4xxx switch was. The cameras should connect without issue. I am wondering if there is a problem with...

@EMPIRETECANDY Do you have any idea what would be causing this?

As I plug them in it shows they are connected and consuming power, just nothing shows up on the camera management screen

Today I plugged them all in and then turned on the NVR. On the 4xxx, I didn't do anything manually, it just recognized them as "Port 1", "Port 2" etc

I recently purchased a 5xxx NVR from Andy to replace the 4xxx that I have been using forever. It has 8POE ports on the back, same as my 4xxx, but this one can handle 32 channels (I have some random IP cameras too and ran out of channels on my 4xxx). I have the new 5xxx setup on my network, can...

I will try that, it’s just frustrating because everything worked fine for years and then with these firmware updates it all went to hell. I saw another user having the same issue of transient alerts too.

Okay. H.265+ is not even an option on my cameras. Still trying to troubleshoot my lack of push notifications for IVS events

I had posted everything I’ve done thus far in another thread including factory resets, deleting the IVS settings, deleting my app...basically starting from scratch with my whole setup and I STILL get maybe 1 of every 20 IVS notifications pushed to my phone. They all still record on the NVR no...

Does @EMPIRETECANDY have any suggestion or solution since multiple people are having problems with IVS notifications not pushing to mobile devices?

H.265 or H.265+? What encoding should I be using to make IVS work?

Has STILL been an issue/PITA for me for months. I have upgraded firmware on the NVR and cameras, downgraded, reset, factory reset, uninstalled/reinstalled the app, deleted the IVS rules and redid them....nothing seems to fix it. Worked fine before all these firmware updates and now IVS events...

Where is that setting? Or maybe it doesn't apply to my cameras or NVR

Nothing but problems with IVS notifications for me after recent firmware updates. They used to work with no problem, and then were sporadic, and now I don't get them at all in the app. In looking on the NVR, they are all recorded so it's just not pushing to my phone. Several other people have...

Is the problem with the app or with the NVR firmware? I updated my NVR and camera firmware with the updates posted by Andy, and have since lost IVS notifications and the ability to play back events ('no record found') on my iPhone. Maybe its an app issue and not a firmware issue? The events play...

Is there a way to downgrade? I updated my NVR and have since lost IVS push notifications to my phone.

Push notifications are very sporadic...when I am on the NVR directly and search IVS events, I see numerous per day. On my phone I maybe get 1 -2 at most, and they are not even viewable, it says 'no record' despite being able to watch them on the NVR via web browser. Prior to updating the...

That’s how I’ve historically done it (subscribing) and that still doesn’t work. I think it’s something with IVS being on the schedule in the NVR and IVS not being a schedule option in the cameras, only regular, motion, and alarm.

No, I don’t know where to get the old firmware version and was hoping others may have noticed the same issue. I upgraded my cameras and the NVR firmware from Andy since now you can access the feed from Chrome without needing plugins, which I couldn’t do before from my Mac.

Anyone having issues with "No Record" for event notifications like IVS cross line, etc? Not sure if its my firmware update on the cameras, an app update, ios13 update, or a NVR firmware update but I can't view video clips off the notification like I used to.

Never used to have problems and things just worked previously. Since I updated my cameras to the latest firmware from Andy, I've found that I still get push notifications in iDMSS for IVS trips but when I go to view the video clip, it says "no record" and won'y play any video clips. There is a...

My truck was parked in front of my house overnight, lady felt like it was a good idea to back down the street and right into the side of it. Over $2000 in damage. And the truck is only 3 months old. Ugh.