Search results

I think you guys should use iVMS for android/ apple. You get the extra features like remote controller where you can disable remote from app the smart/motion detection. Remote playback etc from device. I had/have tinycam but havent used it for ages. Implement OpenVPN client from your phone...

The certificate is generated in a unique form and then encrypted with your unique user and password. Unless a device has that certificate loaded on it locally, AND knows your vpn (encrypted) user & password they can't gain access. I think you are good. I've never had problems after...

What hackers do is they run port scans on your WAN/ modem address that shows what ports are open with port forwarding. Happens on the whole internet trillions of times a day on every public IP address. The way VPN works is the router generates a unique digital certificate, and vpn usually...

One thing that sort of worked in the past enlargening holes with cables i'll share...... attach a thin wire to the rj45 strippped wires, loop the wire twist rj45 wires around. tape the joints with electrical tape each end then the middle -push the cable rj45 up into the soffet left with...

thanks for useful post - yeah camera over the soffet hole for sure, i'm not much of a fan of exposed cable runs. thank you.

thank you this was a useful post. yeah I suspected I needed a 25mm hole. the reason I dont have the cams is its a new home and its down the order of priorities but need to run cables to close in soffets.

yeah but ive posted this under the hikvision camera section and so I was more concerned with the hikvision rj45 waterproof connector.

Hey mate read the post again as you've clearly got the wrong end of the stick as to what i'm asking. CAPS even - interesting. I was asking for people who had used the waterproof rj45 connector what hole size they recommended. Hopefully i'll get some mre useful responses. cheers

Hi everyone. Currently preparing for camera install but dont have the cams yet. Please does a 20mm soffet hole work for the waterproof rj45 connector or do I need 25mm? I have drilled all 20mm holes but i see the rj45 Hikvision connector might be 19mm. e.g. a bit tight. What are your methods...

Hi does any one else have this problem? Every now and again I lose the draw fields for Line Crossing and Intruder Detection and the cam no longer sends alarms for those settings. The camera is a DS-2CD2432F running 5.4.5 Build 170123. The reason I stopped there was the restrictions I recall...

There is a youtube video on the DS-2CD2365G1. By all accounts the 6mp seems really good, local installer here talks well of them & they have "dark fighter". But really if you want good night time vision you gotta install a IR Illuminator.

yip will do. might be a few months as its for a house build. in the meantime if there are any learnings please share

Hey thanks alot Appreciate you taking the time to clearly display out the variances and impacts in such a clear to see manner. It might be a case of deploying IR Illuminator as well There arent many comments in forums on DS-2CD2365G1-I so bit hard to get a gauge. Have read a couple of...

hi mate. how are these performing in night & daylight. i am thinking of deploying these. DS-2CD2365G1 rgs

per below please what do you think of DS-2CD2365G1-I "dark fighter". I will also likely deploy IR illuminator. rgs

Hi would you mind taking a look at DS-2CD2365G1-I and giving me your thoughts? This is a "dark fighter". rgs

Ok I will take a look. Thankyou. Do the 6Mp at least perform same as Hikvision 2142 2132 etc? Wanted to stay Hikvision cause already know & installed one system. Searched DS-2CD2363G0-I turret and 2CD2365G1 on here but not many references. rgs

Hi thanks. Yes I have learnt what you are saying with the domes and was therefore targetting turret. I was a bit confused with 2cd2355 being called a 6mp camera as when I pulled the datasheet it seemed to imply 5Mp yet it is referred to as a 6Mp. Also hikvision usually had the MP numeral...

Hi I appreciate what you are saying but I imagine there is probably only a couple of choices & so was looking for some feedback to that model or other. rgs

Hi guys. Please what is the best 6Mp Turret you would recommend for residential / pro -sumer. Its been 5 years since I installed a 2142fwd-is 4mp dome camera & 2132f-is 3mp dome camera network of 4x camera network at a remote house. And now I am building a new house with a "comms room/...

well I possibly can if I leave ivms4500 as an application up in the background permanently. But you never used to have to do that, and to be honest who would do that as often you clear all re apps. What i mean is only the last 5 notifications are presented on ivms front home screen see...

Hi everyone With ivms 4500 update on android, either 4.7.3 or 4.7.4 has anyone managed to get anymore than the last most recent 5 push/ surveillance notifications on the android phone? I am using Push Notifications for line and intruder e.g. Notify Surveillence Center. I used to get ALL...

Hi Alastair. How are you? I thought 5.4.1 was an okay release for the backdoor fix? Or am I wrong is it only for the gmail TLS fix? I thought 5.5 was a bad release and many people were trying to get back as much was broken. My comments are in relation to 2142 4Mp domes and 2432 3Mp...

Opps i meant i dont use Hik Connect.

Hi. SouthernYankee is right. I wrote one on implementation on my ASUS router as a VPN server. I dont use Hik Vision as I havent yet understood the advantages. It maybe a tool for ma and pa users like some other manufacturers for ease of getting up and going. I use DDNS via NoIP on the...

Hey thanks. Ive already had push notifications working for a number of years with this config.. My problem starting a month ago was after upgrading to ivms 7.4.3. it all stopped working. Then by fluke changing region got it working, then it stopped again, then i noticed IVMS had disabled...

An update. I happened to look in the alarm set notifications ivms option and ALL 5x cameras had been switched off. I dont know how this would have happened. I did not do it. Since turning on ive had a motion notification. Post it so others know to check Set Alarm Notification hasnt...

Hi i connect to my cameras direct no nvr. Notifications used to work and then I upgraded from ivms 4.6 to 4.7.3. Notifications stopped instantly. After 7 days of failure I changed to region USA and it started working push notifications. Then again after a couple days the notifications...

i think your user is associated with hik-connect? I am not using hik connect and formerly I havent needed a user to login, use hik-connect to get push notifications. Now you mention it is there a login on the 4.7.3 ivms? Mine was working 5 days ago without using the "login" on ivms which is...

Changed back to Oceania when things were working, worked for 5 or so days , changed nothing & now today push notifications are broken again none all day. Hikvision I mean Sickvision - why so hard to keep everything running?