Search results

I installed blue iris on a dedicated windows pc.

We have a winner. Problem Solved Update: This was a tricky one to figure out. I bought the tester that was recommended and both ends tested out fine. I was just getting ready to do a test with the ac adapter hooked up and thought I would test the camera again with just using POE+ at the...

This is working, however....I noticed when I reboot my computer I had to go back to computer management and set up the login again to the blue iris service. I only noticed this because when I was looking at my motion clips I was getting writing errors. I remembered that I rebooted my system...

Thanks for this works. Seems to be working perfectly. My only question is the .BVR files when I access the clips on another computer from the home that doesn't run Blue iris. I read an old thread that says to right click on the clip and choose export to .avi to play the file, but I do not...

Tester came today. The lines tested out good. Only 1 thing left. Have to try to power it with the power supply and see if it finds it then. I still don't understand how the lines are testing good and it's not finding it on the network(even though its getting power),

Hi, I have Blue Iris setup in my network on a PC. However, I also have a synology Nas in this network. I want to do direct to disk recording on the Nas as well as the storage. Is this possible?

Agreed. I'm gonna pickup one of these testers. Thanks!

I actually just looked up the differences online between T-568A and T-568B. I can confirm that they are wired T-568A. Is this what is causing my issues? Should they be T-568B?

Can you show me the wiring diagram differences between the 2? I want to take a look at the RJ-45 end and see which one they used. If it was wired to T-568A would this be causing these issues?

Ok, so I tried to hook it backup after initialized and it still didn't find it. The strange thing about all this, is that it's always powered up when I connect my POE+ switch to it. The lights come on and it turns into its default position. But, then it never shows up on the network. I have...

Update: Took the camera down myself. I plugged into the switch with a short cable. It powered on (just like it did before when it was mounted) except this time the config tool found it. I initialized it. So, I guess this eliminates it being a bad camera. I see 2 issues left. I'm going to...

It's probably going to be a few weeks before I can report back on this (as far as the trying to run the short cable to the router and tying ac adapter). The person who did the install is going to come back out to disconnect and do some testing.

Yes, I have verified the switch ports are using POE+ many times.

I have verified that all are on different ip addresses. I have already factory reset the dahua camera multiple times.

It was 192.168.1.108. But, I changed it to 192.168.1.109 after initializing.

It's the furthest camera from one end of the house to the other. I would say at least 100 feet of cat6 they probably used (probably more). I have a feeling it's just that it's not getting enough power. I should have had the ac adapter put on it. I will find out soon enough.

Everythings been rebooted, still nothing. I'm gonna take the camera down where it's mounted and connect it directly to the switch with a short cable and report back.

I have verified that everything is on separate IP addresses many times over and over again with my checks. This is my switch https://amzn.to/2xfHsmh. I'm only using 4 ports on it. port 1 is the ethernet. port 2 is a nas. ports 3 & 4 are for the dahua cameras. I modified ip address of the...

Would the length of the ethernet cable be causing an issue when using poe+? They nearly used 250ft of ethernet just between 2 cameras.

Something else to note and not sure if they are related or not. When I use the config tool or blue iris for the 2231, I can see the camera. However, I have been unable to see the 2231 in the browser when I type in its IP address. Again, that is a separate issue from what's going on, but just...

Just tried another reboot and still the same

Just to be clear, its the 59225 (PTZ) that I can't get to show up. I can get the 2231 to show up on the config tool. I did try rebooting the router(last night) and still couldn't get it to show. I will try a complete reboot again. I did read about leaving uPNP was not a good thing in...

I ended going with this that someone recommended https://www.amazon.com/gp/product/B019OM4VOA/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Hi everyone, I've tried a bunch of things, but I can't get my network to find my dahua 59225. I have a 2231 running as well on this network. Here's my newbie mistake. I had these cameras installed by an electrician who ran ethernet to both cameras before checking them. I see now how easy it...

Hi guys, Im going to be running Dahua 59225's and 2231's. Ive been looking on monoprice at cat6 cable at this Monoprice Entegrade Cat6A Ethernet Patch Cable - Zeroboot RJ45, Stranded, 550Mhz, STP, Pure Bare Copper Wire, 10G, 26AWG, 7ft, Blue - Monoprice.com. Would this be a good cable to...

I see that they do come with the drives, I just wasn't sure how much hard drive space I should keep to write on when recording 24/7 from blue iris.

Do I need to buy another external hardrive to attach to these as well. If so, how big should the drive be when writing from blue iris?

Also, I was gonna go with this for the pc for blue iris Dell Optiplex 790/990 Tower Windows 7/10 Intel Core i5 Quad C DDR3 WiFi HDD/SSD | eBay

Monoprice Entegrade Cat6A Ethernet Patch Cable - Zeroboot RJ45, Stranded, 550Mhz, STP, Pure Bare Copper Wire, 10G, 26AWG, 7ft, Blue - Monoprice.com is this ok for the cat6 cable for the system? Theres so many ratings it confusing. I just wanna make sure I'm getting top notch cat6 for my cams...

Anyone?