Search results

That only saves the logs and pictures, not the video

Hello, I have 6 AcuSense cameras attached to an NVR, all footage is recorded 24/7 (continuous) to a hard drive on the NVR. I have setup intrusion detection and line crossing which are working as expected. I see the 30 seconds videos are automatically saved each time an event happens, which I can...

Is is probably caused by the umbrella, move it and check again.

Are you setting up intrusion detection in the camera or the NVR? Once I had a similar problem, when by mistake I setup the intrusion detection in the camera instead of the NVR. Make sure you do it in the NVR first, then log in to the camera and confirm that all settings are copied from NVR to...

I used to utilize Line Crossing but, just as motion detection, too many false positives. Getting much better results with intrusion detection. I use the following settings Threshold(s): 2 Sec Sensitity: 30 Percentage: 1

As others have explained, you need to access camera settings, not the NVR settings to turn on/off IR. Step by step: 1. In the NVR settings turn on Virtual Host (Configuration -> Network -> Advanced Settings -> Other -> Check "Enable Virtual Host". 2. Now you can reach the camera by going to...

We have over 500 cameras in the field and all of them do that twice a day (day to night mode and back). Only cameras that run in one mode, for example, day mode only, in a 24-hour lighted area or in a night/IR mode, in a always dark area can avoid this. Thanks, Memonics

Hello, I am looking to purchase few NVRs, here are the requirements: 1. 4 POE Ports 2. Supports and can handle 4 x 4 Megapixel cameras 3. Audio in/out 4. Alarm out 5. Supports 4TB drives Currently using HikVision 7716 but looking for smaller/cheaper options to build few custom systems for a...

Please send me the catalog. Thanks, Memonics