Search results

  1. O

    SD1A404XB image will a 5442T-ZE be way better?

    I have read those before, but like i said i only wanted to be able to read them myself not automatically. I thought that would be different but apparently not. I thought about LPR camera in the past, but not sure if the corner in the road makes it a possible in a good way. Also because of the...
  2. O

    SD1A404XB image will a 5442T-ZE be way better?

    Below see the image quality of my current SD1A404XB. I would like the image to be a bit better, no sure if that is possible (without thousand + dollar cameras). i would like to be able to read the license plates of the cars also on the road. (Besides the left black one) Will a 5442T-ZE give a...
  3. O

    Recording General, Motion, Intelligent makes search difficult

    I have a few dahua ( 5442) cameras and a Dahua nvr 4208. My question is about the recording. When you go to search you will see a green line, with yellow and blue blocks in it (if motion and intelligence sensor went off). When i look at the recording it stops when it goes from green to yellow...
  4. O

    Dahua NVR web GUI "config file error" not showing cameras..

    I think i solved it. But maybe not usable for you @Poli_88. My NVR has got a PoE switch build in. I changed my camera manufacturer from ONVIF, to private. (So also from port 80 to 37777). I cannot pick Dahua, just a small list. After doing this i am not getting the config file error anymore...
  5. O

    Dahua NVR web GUI "config file error" not showing cameras..

    I also noticed today that locally on NVR all is working. I feel bad for you, but i am a bit relieved i am not the only one.
  6. O

    ***PSA for those with a New DAHUA NVR with Built-in PoE switch

    Is someone here familiar with the "error config file"? I own an 4208-8p-4ks2 which gives me that error. I have got the most recent FW, so V4.0. Factory reset and reset parameters didn't help.
  7. O

    Dahua NVR web GUI "config file error" not showing cameras..

    I have got the same problem when i upgraded the firmware on an 4208-8p-4ks2. Any ideas how to solve this? (Going back a FW version didn't fix the problem)
  8. O

    Dahua 4208 not showing channels on recording page

    My 4208-8p-4ks2 is show my cameras and live view is working fine. I have set the recording schdule to all and 24/7. But when i go to "Search" under Camera Name i am seeing no channels/camera, just an empty list. I have already tried a factory reset. Any ideas?
  9. O

    Trying to identify camera

    Long story short, i am trying to help the apartment building where my old uncle lives. The have got a Dahua NVR 4208-8p-4ks2 with 6 cameras. For some reason the motion detecting is not working. So i thought about updating the camera firmware. But i don't know which type it is. The cameras are...
  10. O

    Camera is acting strange, or is it the HUE light?

    Trying 1/75 at the moment. Will give this a few hours to see if this solved my problem. Also changed the color mode to color instead of B/W. I have got enough light now to use color.
  11. O

    Camera is acting strange, or is it the HUE light?

    Have you seen the video? Does that look like what you mean? Which speed will solve this problem do you think?
  12. O

    Camera is acting strange, or is it the HUE light?

    I have got a Philips HUE Filament E27 light next to my front door. I have also got a camera pointed right in front of that door. Recording is done by Synology (7.0.1). That light is always on after 18.00 and goes off at 09.00. I used motion detection before (i have also got a motion sensor...
  13. O

    Dahua VTO2211G-WP + Dahua screen no video

    I have here a VTO2211G-WP with 2 Dahua VTH5221DW. I am trying to set this up. Two problems: The door Bell keeps rebooting after a minute or so(PoE) which looks like something to do with anti tampering button. Because something the alarm goes off. But we are not able to push the button down any...
  14. O

    Night settings BI & Dahua Camera's

    I know that this depends on the situation, but i am still wondering what you guys use at night. You have so many different options with a Dahua camera. A little bit of info about my own setup: 3 x DH-SD1A404XB-GNR (one the PTZ within BI doesn't work, but it should show a static picture so...
  15. O

    Synology record 24/7 plus motion detecting gives me a lot of 10 sec clips

    SS depends on the cam for the motion trigger (current setup, like i said it is also possible to let SS handle the trigger. But this gave me a lot of false triggers). The short clips have got something to do with anti dither + pre record + record delay. It is something like anti dither + pre...
  16. O

    Synology record 24/7 plus motion detecting gives me a lot of 10 sec clips

    Yes synology can do both and also handle the motion trigger. I was kinda hoping for a better setup of the anti dither etc. Settings. Yes i have tried smart detecting. The problem is not really that it is a false trigger, but more the fact that it is saved in very small clips. Will look at the...
  17. O

    Synology record 24/7 plus motion detecting gives me a lot of 10 sec clips

    I record my Dahua cameras (3x Dahua DH-SD1A404XB-GNR) on my Synology DS-3617x with the surveillance station package. Works fine for 24/7 recording. My question is about the motion detecting. I also use it for motion detecting. I have selected the "by camera" option because letting the...
  18. O

    Login FI9853EP "Install plugin error", how to login?

    Feeling a bit stupid..... 32 bits Pale Moon works. I missen the fact about 64 bits will not work. Many thanks!
  19. O

    Login FI9853EP "Install plugin error", how to login?

    Does someone have got a recent solution to login to a Foscam 9853EP? I keep getting the please install plugins error message. I know this has got something to do with NPAPI and i should try different browsers. But i have tried IE, Edge, Chrome, FF, Pale Moon and brave. Adding to trusted sites...
  20. O

    Dahua PTZ in Blue Iris Not Working

    Unfortunately i am having the same problem with the 4k Version of this camera. (Dahua DH-SD1A404XB-GNR) Would do you mean you re-entered the ONVIF user info again? When you insert the wrong credentials the camera will show you an error. So i am not getting what went wrong in your situation...
  21. O

    Red error? (-13.23T) left lower corner

    Okee i did all that, and the problem is gone. So thanks for that! I didn't know the software would add both of the storage sizes. I thought this would never become an issue because the 90 days would be over way sooner. Couple of questions: -So it is not possible to rename the folder? Not...
  22. O

    Red error? (-13.23T) left lower corner

    My apologies, you are right. Doing it in once is just as easy.
  23. O

    Red error? (-13.23T) left lower corner

    Status indeed shows an over allocation error. But what is that and how do i fix that? Screenshots on the way.
  24. O

    Red error? (-13.23T) left lower corner

    I have checked that, and it is all correct. I will upload screenshots.
  25. O

    Red error? (-13.23T) left lower corner

    Could somebody tell me what the red remark in the lower left corner means? It says -13.23T at the moment. I looked at the logfile it just says clips. I have tried to repair the DB, but no dices. I have found a site that said it just means that many files were created. But why is it in red then...
  26. O

    Motion trigger when switching to night/IR vision

    What is a good working percentage you think? Sometimes i also get a false alarm from car headlights. I picked 40% now.
  27. O

    Motion trigger when switching to night/IR vision

    Thanks for your reply, but i have watched the first two videos and day/nighttime is not even mentioned. He makes one remark about "make time" option and light, but that is all. So i am not really sure what to do now.
  28. O

    Motion trigger when switching to night/IR vision

    My Dahua camera triggers an alert when it switches from normal light to IR (because it is getting dark outside). I don't use day/night profiles. Is it possible to solve this false alarm?
  29. O

    Blue Iris Android app motion clips max 3 MB?

    I have two questions regarding the BI android app. Why am i not seeing all my clips when i press the calendar button? I have to switch to alerts to see the most recent clips. And second question is, all my motion clips are max 3 MB and give or take 10 seconds. But when i look at the BI software...
  30. O

    BI4 & Pushsafer working, but without screenshot (plus couple questions)

    I use a Dahua DH-SD1A404XB-GNR camera with Blue Iris 4. Working 90% at the moment, the PTZ controles are not working but i will come to that in a different topic. Less important for now. What is more important is getting my pushsafer to work. When i look at the examples...
Top