Search results

Hello guys, Is there alternatives for this camera with good sensor right now or it is still actual model?

I try to change TCP/IP settings to DHCP and I get the error:

Hello everybody, I changed the NVR newtork setttings to bridge mode. So all my cameras come from 10.1.1.255 network to 192.168.1.255 network after rebooting. They work fine and I can see all my cameras from my home network. But the one camera IPC-HDW5442TM-ASE still has 10.1.1.68 address and...

I'm also have the problem with PTZ autotracking SD6AL433XA-HNR . During autotracking when I person stops more 10 seconds the camera loses autotracking. The second problem sport camera interupts current PTZ autotracking. Could you explain how configure IVS rules for spot and PTZ cameras so...

Could you share how you setup IVS rules to switch on autotracking? I think if you did stop for about 15 seconds then PTZ camear would lose tracking.

Yes, I think you all are right. The spot IVS interupts autotracking process. How can I deal with it without much Bourbon drinking :)? Here my settings are.

I setup IVS rules from the Web interface and changed the Tracking Target Size Ratio from 10 to 50. Unfortunatelly camera loses target in several seconds of autotracking. It starts autotracking about 3-4 seconds after that interupts it and repeat the process a few times. Here examples are.

I almost always use NVR interface to setup IVS rules for all cameras. There 3 ways to work with IVS rules: camera web interface, NVR interface and SmartPSS application for Windows. Would you recomment to use ONLY web camera interface ? Unfortunately I've not payed attention to it.

I setup intrusion box and trip lines. Unfortunately they dont work. It was snowing a bit.

Thank you for settings sharing. I'll try to make the same settings.

I use several 5442 cameras for this and they works fine switching 433XA to necessary preset. I don't know I setup IVS rules for 433XA. Could you tell me how you configured IVS rules for 433XA ? Do you use triplines and intrusion boxes ?

I uploaded IVS rules for Spot CAM2 and PTZ Preset 2 .

The intruder must cross IVS tripline not just touch the tripline.

Yes , it starts autotracking.

The PTZ camera needs some ttime about 2-4 seconds to position to the PTZ Preset so moving intruder can be already inside of Intrusion box. So the PTZ CAM will not see how an intruder crosses Intrusion box borders. Is it necessary for the Intrusion box rule to work crossing box borders? In...

For the Intrusion box rule to work , is it necessary that that the intruder crosses the Intrusion box borders or it is enough for the intruder to simply appears inside th Intrusion box without crossing?

Hi Everybody, I bought the SD6AL433XA cam recently ( thank you @EMPIRETECANDY ). The latest fireware is installed for this camera. The spot cameras are used to link SD6AL433XA for different presets. The spotter Cam 1 calls PTZ #1 , spotter Cam 2 calls PTZ #2 and etc. The problem is that...

Is it possible to manage Smart Plan using DMSS application? For instance can I switch on or switch off the Smart Plan using DMSS mobile application?

What AutoHome value do you use? What will happen in the next case? For instance the TimeTask AutoHome value is 120 seconds and the Autotracking time is 180 seconds. IVS triggers autotracking. What will happen after 120 seconds? Will TimeTask cancel Autotracking or it will wait for 180 seconds...

@ Do you use Idle Motion or Time Task to return PTZ camera to its home preset?

Hi, I became also an onwer of SD6AL433XA-HNR. It is a good camera but I have some problems with setup autotracking. Could you tell me how you setup this autotracking on the video? As far as I know to setup autotracking I need IVS rules for it. Is it true? Can I setup autotracking without IVS...

I was also going to buy SD8A840-HNF-PA but I came accross the weight is 10 kg. I need to install PTZ camera on the pole 7 meters high. Now I'm not sure that I can install it. So I'm looking for another PTZ cameras with 1/1.8 sensor.

Sorry I didn't understand. Could you explain me what camera is better in the night SD5A425XA-HNR with 4mp or SD5A425XA-HNR with 8mp ? The sensor is the same for both 1/1.8"

Did you use DH_NVR5XXX-I_MultiLang_V4.002.0000000.1.R.220211 or DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.2.R.220120 ?

Could you tell me where I can download the firmware DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.2.R.220120 ?

I use NVR5416-16P-4KS2E that was made at 2019-12 Could you tell me where you could download DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.2.R.220120 ? In the link Firmwares I could find only DH_NVR5XXX-I_MultiLang_V4.002.0000000.1.R.220211 firmware but it is only for AI NVRs because in the...

The problem is that NVR recorded me when I was approaching my home and send false alarm messages. I don't know how make cameras to avoid email message when I got home.

Thank you for response. Also IVS rules generates a lot of alert emails and this bother me each time. Is there way to switch off IVS rules or SmartPlans remotely ?

I think to works but It should more easy way to disarms cameras.