Hello! I have a few Hikvision dvrs and i was wondering what is the best way to get the full quality footage. I've been downloading it through ivms 4200 and then using another app to convert it so it can be played it without their player. If this is the best way, what software do you recommend to...
I've been doing some research into security cameras and it feels like a rabbit hole. Time consuming, but learning about all of this is kind of exciting.
I realize that BNC is aging tech. I'm dealing with a large commercial building, so rewiring will be difficult for someone like me. This is not...
Hi,
I recently tried to upgrade the dvr model mentioned to the firmware version 4.21 mentioned here, but now I ended up with a dead/bricked one. It does start, the HDD starts, the fan starts, the red led on the main board is on, but no beep and no lan or serial connection shows up.
I tried to...
Hello
I enabled channel-zero in the DVR but it won't show up on the hik-connect app the connection type is hik-connect domain when i set it ip/domain (locally) i can see the channel-zero but i want to see it on the hik-connect domain connection because i don't have fix ip and i don't want to pay...
Hi there everyone, I hope you can help me with this problem I have. The story: I have had installed some cameras in my house. The system consists of 8 cameras, all of them AHD 1080p coaxial.
I bought a Dahua XVR7116HE-4KL-X and I noticed something strange the day I turned it on, I was unable...
Greetings Everyone!
I have recently acquired an used old DVR. Its an 8 channel analogue device. On the box it says IP Vision - nothing else. Hence, identifying this thing has become a great challenge, let aside the issue with the device.
While trying too boot up it says "Embedded Net DVR" on...
I have a STARLIFE hybrid DVR, I Forgot the password. I tried many ways like, using default password, removing cemos battery. But it wont works. Please Somebody help me.
S/N : 201609020451
Model: SL-FHD1008DVR
Company: Starlife
DVR System:
H.264 Video Compression
PAL
Pic Of S/N & Model
Hi all,
I've been on this search for answers & I can't seem to get any on other sites.
So I'll be living in a converted travel van that I've built. My goal is to install a dash camera, a rear view camera for back up that ALSO serves as a rear "dash cam", & two undermounted side mirror cameras...
Has been working fine for months. Unit lost power, and on return it reboots with a single beep every few minutes. Have tried flashing again (as have done before) but keeps resetting. Has flash chip died?
Can login to admin console breifly until it reboots. Connecting to serial ttl reveals...
Trying to get a new dvr to replace our old lorax one that used bnc cameras. Does this work?
https://www.amazon.com/gp/product/B06Y6J7TVF/ref=ask_ql_qh_dp_hza
Im after a bit of help with my Hikvision setup. Im trying to get my cameras the smoothest/best quality picture I can.
Ive got one dome - DS 2CD2142FWD-I and two bullets - DS2CD2042WD-I.
The NVR I have is DS-7604NI-K1/4P
Any help with settings would be greatly appreciated.
I understand each...
Hello All, new member here and desperately need some help with my Hikvision Hilook DVR and resetting the admin password.
I've been in touch with Hikvision support multiples times and tried to reset the admin password using the XML file support sent me via the SADP tool. Unfortunately after...
Hello everyone I've a problem while flashing HIKVISION NVR,IPC AND DVR with serial cable. I've reinstalled my os on the laptop which is windows 7 64bit. The serial cable flasher was working fine before reinstalling the os. I've tried with many drivers and different terminal programs likes secure...
When I watch playback of motion detect videos it skips a few frames. For example if a car drives in front of my house I only see the first second of it driving by and the remaining few seconds of the car I do not see. If motion detect is not enabled and I watch playback of the motion the issue...
Hello,
I am working on a project that involves reading frames from 8 IP cameras (all Dahua, but different models/firmwares) and bundling them into a packet for further processing.
If I simply read the incoming RTSP streams frame by frame with OpenCV's VideoCapture, they are out of sync by ca. 2...
Hello,
I have some Hikvision cameras connected to my DS-7716NI-SP that work great and trigger motion events just fine, but I purchased another ONVIF camera (not sure of the model) that setup just fine and I can view the video and recordings with no issues, but I just can't get it to trigger a...
A good friend of mine asked if I could help him update his camera system. He currently has
DI-0635V SUPERDOME® 620TVL INDOOR IR DOME CAMERA W/ AUTO-IRIS VF LENS cameras with a Truon DVST 8808 8 CH H.264 DVR. So he has coax. He said the new cameras all can be stationary.
Is there a decent...
Hi,
I've got a couple Hikvision DS-7332HGHIs at work.
We'd been using 3.1.8 HC 180130 which we are used to.
I tried to update one of them (our backup) to 4.2 and accidentally bricked the device, so I restored it using TFTP and Baseline Firmware_DVR(SH series)_ML_3.3.4_170220
What's the...
Hi.
Does anyone know if the HIKVISION DVR DS-7204HVI-SV has 4 pins activated for serial console inside the board that can be used to access the U-BOOT console?
Thanks in advance.
Hello all. I'm unable to access my swann cameras using blueiris. The first two images are from my DVR's settings. The next image is the settings for blue iris. If anyone could help me, I would be incredibly grateful.
Hello all!
I am fairly new to video surveillance and Hikvision products in general, and I ran into an issue with the Google Drive (or any other cloud provider for that matter).
The problem is, that even the authorization key and all the events and time intervals are legit I still see no...
Hello,
I'm planning to mount a camera on my grandparents house. But it would suck if i had to pay for an NVR for just 1 camera. Is it possible to save on an Windows Server 2012 share? They have a server there. Or is it possible to save to my local NAS trough pfSense Tunneling? I need to acces...
After several power outages my Dahua NVR stopped sending emails
and even after resetting it to default and re-entering all parameters no way to send email
the status is online and averything work fine, the email account has no problem and the mobile application works perfectly,
I did not flash...
Good day,
Im pretty new to CCTV universe and im looking for assistance.
I have currently installed 8 cameras with cat5 cable on a dhi-hcvr4108hs-s2 dvr.
So far 6 cameras are showing and i have trouble shot multiple ways why the other to are not.
Is it possible that only 6 cams can only be...
ok i have a dvr that only has h.264 on it for any information. in the tiny cam app i use yale for camera brand and hd720 for camera model and doing that with regular plug in cameras i have 3 working.
what i need is to get the wifi ip cameras that tiny cam sees to work on this dvr. so i set the...
Hi all,
Did the purchase years back for a QSEE costco deal, old 600tvl cams, 8 channel. Worked pretty well and it was my first time doing a cam install and overall, it worked well minus the need to install a plugin when accessing the DVR via a local network via IP.
Well the DVR stopped working...
I am trying to view cameras (LBV2521-C) connected to a Lorex LH2116 DVR and having a hard time configuring BI.
Learned from another post I might have to create a user name ( non-admin) for each cam and add each cam using the newly created accounts on the Lorex DVR. Created user BICAM1 and I am...