udp

  1. matthewjames88

    ONVIF camera (IP360) won't connect to NVR

    Hi guys. Forgive me if I have posted this in the wrong section. I have just joined here and have a couple of questions. I have a cheap floodlight cam that uses the ipcam360 app. Even though this is onvif, the camera uses UDP protocol instead of TCP. There is no way to change this, and my cheap...
  2. coderain1

    Programmatically access multiple Dahua NVR using P2P (No port forwarding/VPN)

    Requirement: Access multiple Dahua NVRs camera streams using the P2P method. i.e without having to do DDNS/port forwarding/VPN on the NVRs network. Dahua provides clients for Win/Mac/Mobile, but no command-line tool. There are other 3rd party tools available but all of them have RTSP URL as...
  3. W

    Blue Iris - UDP Camera Issue

    I am trying to connect a Bolin PTZ camera into Blue Iris via UDP and my video looks like this: or I have to use UDP because I am also feeding this camera to a video decoder card. I am running version 5.3.1.1 x64. In the camera status window, I am seeing the FPS/key shows 0.40/0.00. The...
  4. F

    Advice on iperf3 test results

    Hi all, looking for help interpreting iperf3 test results please...I had cat6 cable run to four locations around my house a couple of years ago as part of a renovation so that in future I could install PoE cams in these locations. I'm now ready to install the cams so ran some tests on each cable...
  5. marigo

    Dahua IPC-HDW4431C-A trying to make outside connection

    Hi all, I have noticed that this IP camera from Dahua is trying to make outside connections to the following ports and IP addresses: 114.55.152.165 9084 TCP 115.29.249.74 8800 UDP Are these connections specific for this camera model or do other camera's from Dahua also trying to make outside...
Top