10 cameras - Intel Core i5-4690K Processor 3.5 GHz

Tygunn

Tygunn

Getting comfortable
Dec 24, 2016
409
320
Just wanted to let everyone know how my setup went.
I'm running:
Intel Core i5-4690K Processor 3.5 GHz LGA 1150
Gigabyte GA-Z97X-GAMING 3 LGA 1150 Z97 Gaming Audio and Networking ATX Motherboard
16 GB RAM
SSD startup disk
Windows 10
I'll be moving one of the 4TB WD Purple drives from my Dahua NVR to this box.

I've got:
8 Dahua IPC-HDW5231R-Z turrets
1 Dahua IPC-HDBW4231F-AS mini dome
1 HIKVISION DS-2CD2032-I 3MP bullet

I'm averaging around 55-60% CPU usage with Blue Iris. I'm using direct to disk, continuous recording and motion detection on all cameras.
 
Tygunn said:
Just wanted to let everyone know how my setup went.
I'm running:
Intel Core i5-4690K Processor 3.5 GHz LGA 1150
Gigabyte GA-Z97X-GAMING 3 LGA 1150 Z97 Gaming Audio and Networking ATX Motherboard
16 GB RAM
SSD startup disk
Windows 10
I'll be moving one of the 4TB WD Purple drives from my Dahua NVR to this box.

I've got:
8 Dahua IPC-HDW5231R-Z turrets
1 Dahua IPC-HDBW4231F-AS mini dome
1 HIKVISION DS-2CD2032-I 3MP bullet

I'm averaging around 55-60% CPU usage with Blue Iris. I'm using direct to disk, continuous recording and motion detection on all cameras.
Click to expand...
Your load should be lower..are you using hardware acceleration? Are you viewing on a local monitor? are you still running the demo?
 
Yeah that sounds a little high. i7 4790 here with 6 x 3MP (plus 4 x 640px) cameras and I'm only at 10%. As mentioned above are you running the demo still?
 
that load is high i am running a I7-3770 8gb-ram
and 25 camera's
with around 50% rdping into box
 
miogpsrocks said:
I don't have blue IRIS setup but was considering it.

I also have 8 Dahua Cameras as well as a few Amcreset Cameras.

Blue IRIS list the recommended settings as an I7 CPU however you are running an I5 possible last generation CPU?

How smooth is your recordings? Are you able to do playback and record at the same time, navigate, search,etc...?

My Dahau DVR I think is defective. I can't even do playback without freezing. Its like its lacking the CPU or memory or something which is why I am looking at doing a Blue IRIS DVR on a PC.

Thanks.
Click to expand...

This i5 is a few years old. I'm not sure why they recommend an i7. Perhaps if you can't do direct to disk?

In any case, recordings seem to be the same quality as what the NVR is recording. In fact, even better because I don't get missed frames on events. So super nice in that respect.
 
fenderman said:
Your load should be lower..are you using hardware acceleration? Are you viewing on a local monitor? are you still running the demo?
Click to expand...

I have the full version. However, you're quite right I did not have the Intel hardware acceleration enabled in the options. With Blue Iris Minimized I'm running at 29% CPU usage now. Thanks!
 
  • Like
Reactions: fenderman
Run it as a service also so you don't need the application window open at all
 
Tygunn said:
I have the full version. However, you're quite right I did not have the Intel hardware acceleration enabled in the options. With Blue Iris Minimized I'm running at 29% CPU usage now. Thanks!
Click to expand...
If you want to keep the window open and reduce cpu..there is an option to reduce live view fps, it will not effect recording...
 
  • Like
Reactions: Tygunn
fenderman said:
If you want to keep the window open and reduce cpu..there is an option to reduce live view fps, it will not effect recording...
Click to expand...

Done and done.

I'm already loving the extra configurability of Blue Iris. Being able to configure separate motion zones and trigger on them is really nice. Lets me check at a glance if someone came to the door vs a car driving by.
 
Tygunn said:
Done and done.

I'm already loving the extra configurability of Blue Iris. Being able to configure separate motion zones and trigger on them is really nice. Lets me check at a glance if someone came to the door vs a car driving by.
Click to expand...
Note that motion zones and sensitivly settings are profile depended so you can change them up for day vs night..etc..
 
Tygunn said:
I'm already loving the extra configurability of Blue Iris. Being able to configure separate motion zones and trigger on them is really nice. Lets me check at a glance if someone came to the door vs a car driving by.
Click to expand...
Once you get your sea legs with BI, I'm curious to hear your thoughts of its Motion Detection vs Dahua's IVS (especially Intrusion Detection, if you had any experience with that).
 
Last edited:
aristobrat said:
Once you get your sea legs with BI, I'm curious to hear your thoughts of its Motion Detection vs Dahua's IVS (especially Intrusion Detection, if you had any experience with that).
Click to expand...

I am very curious about this as well. I had a Dahua NVR and ready to jump to Blue Iris if you think it is worth it?
 
CaliGirl said:
No Windows computers in this household and the cameras are all at a remote site 3.5 hrs away. Researching this carefully as it is a big undertaking.
Click to expand...
you have access to the camera feeds...use that and run a windows vm if you have for testing....
 
  • Like
Reactions: CaliGirl
CaliGirl said:
I am very curious about this as well. I had a Dahua NVR and ready to jump to Blue Iris if you think it is worth it?
Click to expand...
I just installed the demo about 1.5 hours ago. I've barely scratched the surface, but I'm pretty impressed with what I've seen so far. I've not had a chance to tweak motion detection yet, I'll play with that tomorrow. Making that as reliable as IVS line crossing/intrusion detection is my biggest need.

Remember, in terms of performance, the demo runs with higher CPU usage that the paid version (assuming you're going to run the paid version on a computer that supports the "direct to disk" recording method).
 
CaliGirl said:
Ok, good idea!
Click to expand...

Yes I used to run VMware Fusion I think on OSX for Windows. You might be able to download free, time limited, Windows VM's from Microsoft for testing and they should do the job for you.

BI uses zones. So I can set up multiple zones on my camera image and have BI detect motion in a zone (intrusion), trigger the alert if an object crosses from one zone to another and so on. I'm still figuring it all out myself but BI is rock solid. I've been running since September without issue.
 
  • Like
Reactions: aristobrat
essjay said:
Yes I used to run VMware Fusion I think on OSX for Windows. You might be able to download free, time limited, Windows VM's from Microsoft for testing and they should do the job for you.
Click to expand...

Yup, you can download and install ordinary Windows 10 from microsoft and simply skip entering a key; then you can use it unactivated for testing purposes.
 
You must log in or register to reply here.
Top Bottom