Just thought I would share a install that has been in the works for a while.
Cameras have been installed since September of 2017. After a 2 Computer changes we finally got it figured out and working to our satisfaction.
Some info of whats going on.
12 users access the site from head office using UI3.
All cameras set to motion detect with a 10 sec pre record.
30 4MP Hikvision Turret 10FPS
1 Geovision 360,
1 Yunch PTZ ( to be replaced with 1 that works ). 15fps.
Systems runs around 35% CPU, all cameras set to direct to disk with hardware acceleration enabled!
8 TB ( 4X2) WD purple with 128gb SSD
2 Gigabit lan cards, (all cameras on private lan)
5500' of cat5e used, 48 port POE switch used.
Upon switching to the new server, blue iris ran into a ram leak during the backup. Everything had to be reprogrammed from scratch but it was worth it in the end.
I had a lot of fun with this project, I have many more blue iris applications coming up!
I would like to thank everyone on the forum for your help and knowledge. Without your help I would still be trying to encode 33 streams
Here are some pictures of the install!
Cameras have been installed since September of 2017. After a 2 Computer changes we finally got it figured out and working to our satisfaction.
Some info of whats going on.
12 users access the site from head office using UI3.
All cameras set to motion detect with a 10 sec pre record.
30 4MP Hikvision Turret 10FPS
1 Geovision 360,
1 Yunch PTZ ( to be replaced with 1 that works ). 15fps.
Systems runs around 35% CPU, all cameras set to direct to disk with hardware acceleration enabled!
8 TB ( 4X2) WD purple with 128gb SSD
2 Gigabit lan cards, (all cameras on private lan)
5500' of cat5e used, 48 port POE switch used.
Upon switching to the new server, blue iris ran into a ram leak during the backup. Everything had to be reprogrammed from scratch but it was worth it in the end.
I had a lot of fun with this project, I have many more blue iris applications coming up!
I would like to thank everyone on the forum for your help and knowledge. Without your help I would still be trying to encode 33 streams

Here are some pictures of the install!