4.0 AI New models General_IPC-HX5XXX-Volt_Eng_PN_Stream3_V2.800.0000000.1.R.190706.zip

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,719
Location
HONGKONG
This is the latest new firmware for these models.

Attention, the firmware support these models only, please make sure you are use the right firmware for the right models and make a default after you finish the updating.


IPC-T5241H-AS-PV
IPC-B5442E-ZE
IPC-D5442E-ZE
IPC-HFW5241E-Z12E
IPC-HDPW5442GP-Z
IPC-HFW5241T-AS-PV
IPC-HFW5541TP-AS-PV
IPC-HDW5541HP-AS-PV


New Feature Description

1 Multi-rule people counting solution.
2 Low bit rate solution.
3 4MP/5MP camera of Series 5 supports high frame rate (50/60 fps) lower than 1080p.
4 Add face detection function on customized fixed focal camera.
5 Add audio importing formats MP3 and AAC on siren and spotlight network camera.
6 Add 2560 × 1440 resolution.
7 Optimize password resetting solution.
8 Support license verification requirement for second period, and add algorithm version display.
9 Improve IVS detection performance.

FIXED Bug: NONE.


Attention, this firmware not suit for IPC-HDW5231R-ZE or IPC-HDW2231R-ZS.
 

Attachments

Last edited:

Davahad

Getting the hang of it
Joined
Nov 7, 2016
Messages
126
Reaction score
84
Assume this support PAL version of cameras as that is what you usually sell me.
IPC-HFW5241EP-Z12E
 

MakeItRain

Pulling my weight
Joined
Aug 7, 2017
Messages
401
Reaction score
218
Got a problem with: Loryta IPC-T5241H-AS-PV

Just flashed and "factory default" and "default". I get a problem:

It complain at the top "Setttings" with big red flag icon. So I click settings and go to system/version.

t complained: "Algorithm authorization expired, please update license"

Yes, yes, I factory default. No working.

So I go back to old version: General_IPC-HX5XXX-Volt_Eng_NP_Stream3_V2.800.0000000.0.R.190521

Old version is working fine. No algorithm problem.

I have upgraded and downgraded twice! Same problem. Why am I so unlucky with firmware upgrades???

Capture.JPG
 
Last edited:

Larsje993

n3wb
Joined
Jun 28, 2019
Messages
3
Reaction score
1
Location
Amsterdam
This update is also for the T5442TM-AS right? I'm having troubles with successfully update this firmware, see picture below.
Anyone knows how to update with succes?

Schermafbeelding 2019-08-15 om 07.18.38.png
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,719
Location
HONGKONG
This update is also for the T5442TM-AS right? I'm having troubles with successfully update this firmware, see picture below.
Anyone knows how to update with succes?

View attachment 45980
Please read carefully, only suit these models.

IPC-T5241H-AS-PV
IPC-B5442E-ZE
IPC-D5442E-ZE
IPC-HFW5241E-Z12E
IPC-HDPW5442GP-Z
IPC-HFW5241T-AS-PV
IPC-HFW5541TP-AS-PV
IPC-HDW5541HP-AS-PV
 

MakeItRain

Pulling my weight
Joined
Aug 7, 2017
Messages
401
Reaction score
218
@EMPIRETECANDY

Can you check with Dahua and see if they can get the 2-way talk working in the next firmware and NVR v3.216 firmware?

The 2-way talk works thru the NVR and iDMSS when I use Amcrest IP2M-841 indoor camera (rebranded Dahua). The IP2M-841 2-way talk works going thru NVR v3.216 and iDMSS Plus. But the IPC-T5241H-AS-PV still does not allow 2-way talking thru the NVR and iDMSS. I have to manually add the camera separately by its own IP. This is a big inconvenience to the setting up VLAN as well.

I originally thought the 2-way talk is not possible on NVR firmware v3.216 but now I know it works with IP2M-841 which is an old camera, that tells me a firmware change in 5241H can make it work.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,259
Reaction score
23,719
Location
HONGKONG
@EMPIRETECANDY

Can you check with Dahua and see if they can get the 2-way talk working in the next firmware and NVR v3.216 firmware?

The 2-way talk works thru the NVR and iDMSS when I use Amcrest IP2M-841 indoor camera (rebranded Dahua). The IP2M-841 2-way talk works going thru NVR v3.216 and iDMSS Plus. But the IPC-T5241H-AS-PV still does not allow 2-way talking thru the NVR and iDMSS. I have to manually add the camera separately by its own IP. This is a big inconvenience to the setting up VLAN as well.

I originally thought the 2-way talk is not possible on NVR firmware v3.216 but now I know it works with IP2M-841 which is an old camera, that tells me a firmware change in 5241H can make it work.
The NVR will have some new updating soon, as i get news from dahua the 4.0 firmware for the NVR will have some update later this month or Early Sep. They release too many new models in the past 2 months, so need time to make them perfect.
 

rflagler

n3wb
Joined
Oct 26, 2017
Messages
21
Reaction score
4
Andy, when you release the next firmware version, will you be able to post both the generic and Dahua branded ones? I just learned the VMS I use will currently only pull analytic events from the cameras if they are branded as Dahua.
 
Top