I'm brand new to camera systems and BI but I've been gradually learning and building up my components.
I recently got a 4k Amcrest IP8M-2496EB and added it to BI no problem. I was able to view and record at 4k/15fps with no issues. I went through the BI optimization page here and saw that I should turn on Intel hardware acceleration to reduce CPU usage. I turned it on for this camera and have been getting no signal from it ever since. The weird thing is it still works if I change the resolution to 1080p but no other higher resolution.
I've tried restarting the camera, re-adding it, even factory resetting it. Nothing works. It streams to the Amcrest app at 4k but not BI.
Hardware acceleration worked fine with 2 Amcrest IP2M-841 cameras. I have an i5-2500k CPU.
Can anyone help me figure this out?
I recently got a 4k Amcrest IP8M-2496EB and added it to BI no problem. I was able to view and record at 4k/15fps with no issues. I went through the BI optimization page here and saw that I should turn on Intel hardware acceleration to reduce CPU usage. I turned it on for this camera and have been getting no signal from it ever since. The weird thing is it still works if I change the resolution to 1080p but no other higher resolution.
I've tried restarting the camera, re-adding it, even factory resetting it. Nothing works. It streams to the Amcrest app at 4k but not BI.
Hardware acceleration worked fine with 2 Amcrest IP2M-841 cameras. I have an i5-2500k CPU.
Can anyone help me figure this out?