5.2.4.4 - March 31, 2020

JNDATHP said:
When I upgraded I got an over allocation error and so any play back was blank. I repaired the database and all is normal.
Click to expand...
Not for me because the H264 recordings play normally, but not the H265 ones. It’s a i7 7700K so it can do H265 HA and H265 preview works, so I’m puzzled.
 
Something changed since about 3/20 or a little later. My cpu was about 50%. I changed nothing and can not seem to get it below 97%. 18 4k cams i7 32 meg.
I did one thing, I added an Amcrest 4k POE, the new one that does 30FPS....seems to be the culprit. I needed a fast cam in that location, records all traffic going by.
That cam was added a couple months back...so not sure.
 
Last edited:
jbc60 said:
Something changed since about 3/20 or a little later. My cpu was about 50%. I changed nothing and can not seem to get it below 97%. 18 4k cams i7 32 meg
Click to expand...
Download the latest release. Check to see if your hardware acceleration is enabled for each camera in the video tab. and disable auto updates. There was an issue in prior released when HA was updated.
 
  • Like
Reactions: Flintstone61
Well, have had some success with CPU. But, I start up blueiris (not as a service), cpu starts about 60%, then over an hour ends up at 95%. I can close the program, restart it and the process starts over. I tweaked the FPS on the 30fps cam down to 20fps and that helped....18 cams total currently..maybe hitting a limit or need other settings tweaked.
 
  • Like
Reactions: Flintstone61
jbc60 said:
Well, have had some success with CPU. But, I start up blueiris (not as a service), cpu starts about 60%, then over an hour ends up at 95%. I can close the program, restart it and the process starts over. I tweaked the FPS on the 30fps cam down to 20fps and that helped....18 cams total currently..maybe hitting a limit or need other settings tweaked.
Click to expand...
Optimizing Blue Iris's CPU Usage | IP Cam Talk
 
You must log in or register to reply here.
Top Bottom