5.2.4.4 - March 31, 2020

m_listed

Getting the hang of it
Joined
Jun 11, 2016
Messages
176
Reaction score
57
When I upgraded I got an over allocation error and so any play back was blank. I repaired the database and all is normal.
Not for me because the H264 recordings play normally, but not the H265 ones. It’s a i7 7700K so it can do H265 HA and H265 preview works, so I’m puzzled.
 

jbc60

n3wb
Joined
Dec 30, 2017
Messages
10
Reaction score
3
Location
Buford, GA 30519, United States
Something changed since about 3/20 or a little later. My cpu was about 50%. I changed nothing and can not seem to get it below 97%. 18 4k cams i7 32 meg.
I did one thing, I added an Amcrest 4k POE, the new one that does 30FPS....seems to be the culprit. I needed a fast cam in that location, records all traffic going by.
That cam was added a couple months back...so not sure.
 
Last edited:

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
Something changed since about 3/20 or a little later. My cpu was about 50%. I changed nothing and can not seem to get it below 97%. 18 4k cams i7 32 meg
Download the latest release. Check to see if your hardware acceleration is enabled for each camera in the video tab. and disable auto updates. There was an issue in prior released when HA was updated.
 

jbc60

n3wb
Joined
Dec 30, 2017
Messages
10
Reaction score
3
Location
Buford, GA 30519, United States
Well, have had some success with CPU. But, I start up blueiris (not as a service), cpu starts about 60%, then over an hour ends up at 95%. I can close the program, restart it and the process starts over. I tweaked the FPS on the 30fps cam down to 20fps and that helped....18 cams total currently..maybe hitting a limit or need other settings tweaked.
 

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
15,521
Reaction score
22,657
Location
Evansville, In. USA
Well, have had some success with CPU. But, I start up blueiris (not as a service), cpu starts about 60%, then over an hour ends up at 95%. I can close the program, restart it and the process starts over. I tweaked the FPS on the 30fps cam down to 20fps and that helped....18 cams total currently..maybe hitting a limit or need other settings tweaked.
Optimizing Blue Iris's CPU Usage | IP Cam Talk
 
Top