5 MegaGixel 1/1.8" low light destroyer for $90-AVOID LONGSE JUNK

I received my cameras last week. Initial impressions are great. These aren't getting installed for another month, though.

Earlier in the thread I read that many (all?) of you were not able to get the "Record" and "Capture" features of the WebUI working. These features do in fact work - you must:

Go to Internet Options
Click Security Tab
Highlight Trusted Sites, then Click Sites Button
Add IP of camera

Be sure to uncheck "Require Server Verification (https)..."
 
DMY said:
I received my cameras last week. Initial impressions are great. These aren't getting installed for another month, though.

Earlier in the thread I read that many (all?) of you were not able to get the "Record" and "Capture" features of the WebUI working. These features do in fact work - you must:

Go to Internet Options
Click Security Tab
Highlight Trusted Sites, then Click Sites Button
Add IP of camera

Be sure to uncheck "Require Server Verification (https)..."
Click to expand...
I don't use the web ui much, but this is good suggestion. I'll put this in the first post.
 
I figure it might be useful to some.. and might as well have everything working

Also, should have said add HTTP://<camera IP> to be more clear
 
What network cable do you guys use to connect the camera to?
I asking, because there's not much space in this water protective cable connector.
Do you just cut off the bend protection of a regular cable or do you crimp you own cable for it?
 
one typically needs to pass a bare cable thru and crimp on a connector.

but if you can get it thru removing only the bend-protector covering (not all cables have 'em) then go for it
.RJ45_Connector_C_4a8280fc6b8f2.jpg
just be careful not to break off the locking tab the cover is designed to protect...
 
If you're like me and you find the boots to be annoying to deal with, flexboot cables are a good alternative if you don't have to cut anything for a junction box etc.

112191.jpg

Monoprice has them dirt cheap compared to any other place I've checked.
 
So, trying to order from Longse (Eddy) has been ongoing 7 days now. Wish it was easier. The whole alibaba monkey business is crazy. Way too many steps.
 
agreed. i'm in the same boat, going back & forth trying to decipher what the next step is to make a deal.
same cams available via ali-express, click-n-wait, but a bit more $...
 
Why are you not trying this with Amanda?
 
Please reply with a link for aliexpress. I can't seem to find the LRDC60S500 specifically.
 
I would not buy from a 93% rating supplier myself.
 
Someone was talking about spiders... My S500 turret keeps getting attacked by them every once in a while

 
What is the difference between an "MTV board lens" and a "CS5mm"? I know what 5mm means but to order a camera I have to select.
 
klasipca said:
Someone was talking about spiders... My S500 turret keeps getting attacked by them every once in a while

Click to expand...

Oh man, all my IR cams attract spiders and Ive tried peppermint oil and bug spray and nothing helps. Someone on a thread recommended using a seperate IR illuminator and disable the on board. I dont find it annoying enough to spend on extras.
 
Do external IR anyway. Very little falsing for bugs, rain, snow, mist, dust, webs, etc plus better night images because you can add a LOT more light. There are zero benefits to internal IR besides cost.
 
You must log in or register to reply here.
Top Bottom